Radeon™ Software for Linux® 24.10.3 with ROCm 6.1.3 Release Notes

Release Date:  June 18, 2024

This article provides information on the latest release version of Radeon™ Software for Linux® with ROCm 6.1.3.

Radeon™ Software for Linux® 24.10.3 with ROCm 6.1.3 Highlight

• Introducing TensorFlow support through ROCm on specific RadeonTM GPUs
• Added official support for Radeon™ PRO W7900 Dual-Slot 
• Official support for multiple Radeon GPUs: x2 RX 7900XTX & W7900, x2 and x4 W7900 Dual-Slot
• Support for ROCm through Windows Subsystem Linux (WSL) on Windows platforms. See the Getting Started Guide for Radeon for more details.
• The latest version of Python module numpy v2.0 is incompatible with the torch wheels for this version. Downgrade to an older version is required. Example: pip3 install numpy==1.26.4

Known Issues

• Radeon GPUs do not support large amounts of simultaneous parallel workloads. We do not recommend exceeding 2 simultaneous compute workloads.  This assumes workloads are running alongside a graphics environment (eg: Linux desktop).
• Intermittent gpureset errors may be seen with Automatic 1111 webUI with IOMMU enabled. Please see https://community.amd.com/t5/knowledge-base/tkb-p/amd-rocm-tkb for suggested resolutions.
• ROCm debugger is unstable and not fully supported in this release.
• “Automatic suspend state when idle” is not recommended when running AI workloads.
• Connecting monitors to multiple GPUs on an Intel Sapphire Rapids powered system may cause displays to not display correctly. We recommend connecting all the monitors into one GPU. For configurations where monitors must be plugged into multiple GPUs, please add the following to your grub file: “intel_iommu=on iommu=on”

For WSL only:

• Some long running rocsparse kernels may trigger a TDR.

Radeon™ Software for Linux® installer can be downloaded from the following links:

• Radeon™ Software for Linux® 24.10.3 with ROCm.6.1.3

Installing Radeon™ Software for Linux®

For detailed instructions on how to install or uninstall Radeon™ Software for Linux®, please refer to Radeon™ Software for Linux® installation instructions.

AMD Radeon™ Product Family Compatibility

Radeon™ Software for Linux® with ROCm 6.1.3 is compatible with the following AMD products:

Compatible 64-bit Operating Systems

• Ubuntu 22.04.3 HWE

^{​​​© 2024 Advanced Micro Devices, Inc.  The information contained herein is for informational purposes only and is subject to change without notice. While every precaution has been taken in the preparation of this document, it may contain technical inaccuracies, omissions and typographical errors, and AMD is under no obligation to update or otherwise correct this information. ADVANCED MICRO DEVICES, INC. MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS DOCUMENT AND ASSUMES NO LIABILITY OF ANY KIND, INCLUDING THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSES, WITH RESPECT TO THE OPERATION OR USE OF AMD HARDWARE, SOFTWARE OR OTHER PRODUCTS DESCRIBED HEREIN. NO LICENSE, INCLUDING IMPLIED OR ARISING BY ESTOPPEL, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. This notice does not change the terms and limitations applicable to the purchase or use of AMD's products that may be set forth in a separate signed agreement between you and AMD.}

^{AMD, the AMD Arrow logo, AMD Radeon, AMD FirePro and combinations thereof are trademarks of Advanced Micro Devices, Inc.}

^{Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.}

^{Vulkan and the Vulkan logo are registered trademarks of the Khronos Group Inc.}

^{OpenCL and the OpenCL logo are trademarks of Apple Inc. used by permission by Khronos.}

^{OpenGL® and the oval logo are trademarks or registered trademarks of Hewlett Packard Enterprise in the United States and/or other countries worldwide}