2nd Generation G-Series SOC Previous Drivers

AMD Embedded Windows®10 RS5 64 bit, Windows®10 20H2 64-bit and Windows® 7 64 bit Windows Graphics Catalyst™ Driver

Operating Systems supported:

Windows® 10 RS5 64 bit

Windows® 10 20H2 64 bit

Windows® 7 64 bit

Devices Supported:

3rd gen G Series family (JX/J/I)

3rd Gen G-Series SoC I Family (Brown Falcon)

3rd Gen G-Series SoC J Family (Prairie Falcon)

3rd Gen G-Series SoC Family (JX)

2nd Gen G-Series SoC (Steppe Eagle)

G-Series SoC (LX)

R-Series SoC (Merlin Falcon)

2nd Gen R-Series APUs (Bald Eagle)

Description, Features, Fixes and Enhancements, Known issues

• Release Notes

AMD Embedded Windows®10 RS5 64 bit, Windows®10 20H1 64-bit Windows Graphics Catalyst™ Driver

Operating Systems supported:

Windows® 10 RS5 64 bit, Windows 10 20H1 64 bit

Devices Supported:

Ryzen™ Embedded V2000

Ryzen™ Embedded V1000

Ryzen™ Embedded R1000

Radeon E9260, Radeon E9550, Radeon E9390, Radeon E9560, Radeon E8860,Radeon E8870, E8950, E917x, Radeon E9565, all G-series,  R-Series SoC and 2nd gen R-series APUs

Description, Features, Fixes and Enhancements, Known issues

• Release Notes

AMD Embedded Windows®10 RS5 64 bit, Windows®10 20H1 64-bit Chipset Driver

Operating Systems supported:

Windows® 10 RS5 64 bit, Windows 10 20H1 64 bit

Devices Supported:

Ryzen™ Embedded V2000

Ryzen™ Embedded V1000

Ryzen™ Embedded R1000

Radeon E9260, Radeon E9550, Radeon E9390, Radeon E9560, Radeon E8860,Radeon E8870, E8950, E917x, Radeon E9565, all G-series,  R-Series SoC and 2nd gen R-series APUs

AMD Embedded Windows®10 RS5 64 bit, Windows®10 19H2 64-bit and Windows 7 64-bit Chipset Driver

Operating Systems supported:
Windows® 10 RS5 64 bit, Windows 10 19H2 64 bit and Windows 7 64-bit

Devices Supported:

Radeon E9260, Radeon E9550, Radeon E9390, Radeon E9560, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and 2nd gen R-series APUs

AMD Embedded Windows®10 RS5 64 bit, Windows®10 19H2 64-bit and Windows 7 64-bit Catalyst™ Driver

Operating Systems supported:

Windows® 10 RS5 64 bit, Windows 10 19H2 64 bit and Windows 7 64-bit

Devices Supported:

Radeon E9260, Radeon E9550, Radeon E9390, Radeon E9560, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and 2nd gen R-series APUs

AMD Embedded Windows®10 RS5 64-bit Catalyst™ Driver

Operating Systems supported:

Windows® 10 RS5 64-bit

Devices Supported:

E8870, E8950, E917x, all G-series and 2nd gen R-series APUs

AMD Embedded GPU, G-Series SOC & R-Series APU Windows® 7 and Windows® 10 19H1 64-bit Catalyst™ Driver

Operating Systems supported:

• Windows® 10 19H1 64-bit
• Windows® 7 64-bit

Devices Supported:

Radeon E9260, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and 1st and 2nd gen R-series APUs

AMD Embedded Windows®10 RS5 64-bit Catalyst™ Driver

Operating Systems supported:

• Windows® 10 RS5 64-bit

Devices Supported:

Ryzen™ Embedded V1000, Ryzen™ Embedded R1000, Radeon E9260, Radeon E9550, Radeon E9360, Radeon E9560, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and 1st and 2nd gen R-series APUs

AMD Embedded GPU, G-Series SOC & R-Series APU Windows® 7 and Windows® 10 19H1 64-bit Catalyst™ Driver

Operating Systems supported:

• Windows® 10 19H1 64-bit
• Windows® 7 64-bit

Devices Supported:

Radeon E9260, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and 1st and 2nd gen R-series APUs

AMD Embedded GPU, G-Series SOC & R-Series APU Windows® 10 RS5 64-bit Catalyst™ Driver

Operating Systems supported:

• Windows® 10 RS5 64-bit

Devices Supported:

Radeon E9260, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and 1st and 2nd gen R-series APUs

AMD Embedded GPU, G-Series SOC, R-Series SOC & R-Series APU Windows® 64-bit Catalyst™ Driver

Operating Systems supported:

• Windows® 10 64-bit
• Windows® 7 64-bit

Devices Supported:

Radeon E9260, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and all R series

AMD Embedded GPU, G-Series SOC, R-Series SOC & R-Series APU Windows® 64-bit Catalyst™ Driver

Operating Systems supported:

• Windows® 10 64-bit
• Windows® 7 64-bit

Devices Supported:

Radeon E9260, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and all R series

AMD Embedded GPU, G-Series SOC, R-Series SOC & R-Series APU Windows® 64-bit Catalyst™ Driver

AMD Embedded GPU, G-Series SOC, R-Series SOC & R-Series APU Windows® 64-bit Catalyst™ Driver

Operating Systems supported:
         Windows® 10 64-bit
         Windows® 7 64-bit

Devices Supported:
         R-Series SoC (Merlin Falcon)
         2nd Gen R-Series APU (Bald Eagle)
         1st Gen R-Series APU (eTrinity FS1r2)
         1st Gen R-Series (eTrinity FP2)
         3rd Gen G-Series SoC I Family (Brown Falcon)
         3rd Gen G-Series SoC J Family (Prairie Falcon)
         2nd Gen G-Series SoC (Steppe Eagle)
         1st Gen G-Series SoC (eKabini)
         G-Series SoC (LX)
         E917x
         Radeon E9550
         Radeon E9260
         Radeon E8860
         Radeon E8870

AMD Embedded Windows®10 RS5 64 bit, Windows®10 20H2 64-bit Windows Graphics Catalyst™ Driver

Operating Systems supported:

Windows® 10 RS5 64 bit

Windows 10 20H2 64 bit

Windows® 7

Devices Supported:

3rd gen G Series family (JX/J/I)

3rd Gen G-Series SoC I Family (Brown Falcon)

3rd Gen G-Series SoC J Family (Prairie Falcon)

3rd Gen G-Series SoC Family (JX)

2nd Gen G-Series SoC (Steppe Eagle)

G-Series SoC (LX)

R-Series SoC (Merlin Falcon)

2nd Gen R-Series APUs (Bald Eagle)

Radeon E8860

Radeon E8870

E8950

Description, Features, Fixes and Enhancements, Known issues

• Release Notes

AMD Embedded Windows®10 RS5 64 bit, Windows®10 19H2 64-bit and Windows 7 64-bit Chipset Driver

Operating Systems supported:
Windows® 10 RS5 64 bit, Windows 10 19H2 64 bit and Windows 7 64-bit

Devices Supported:

Radeon E9260, Radeon E9550, Radeon E9390, Radeon E9560, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and 2nd gen R-series APUs

AMD Embedded Windows®10 RS5 64 bit, Windows®10 19H2 64-bit and Windows 7 64-bit Catalyst™ Driver

Operating Systems supported:

Windows® 10 RS5 64 bit, Windows 10 19H2 64 bit and Windows 7 64-bit

Devices Supported:

Radeon E9260, Radeon E9550, Radeon E9390, Radeon E9560, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and 2nd gen R-series APUs

AMD Embedded GPU, G-Series SOC & R-Series APU Windows® 7 and Windows® 10 19H1 64-bit Catalyst™ Driver

Operating Systems supported:

• Windows® 10 19H1 64-bit
• Windows® 7 64-bit

Devices Supported:

Radeon E9260, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and 2nd gen R-series APUs

AMD Embedded GPU, G-Series SOC & R-Series APU Windows® 7 and Windows® 10 19H1 64-bit Catalyst™ Driver

Operating Systems supported:

• Windows® 10 19H1 64-bit
• Windows® 7 64-bit

Devices Supported:

Radeon E9260, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and 1st and 2nd gen R-series APUs

AMD Embedded GPU, G-Series SOC, R-Series SOC & R-Series APU Windows® 64-bit Catalyst™ Driver

Operating Systems supported:

• Windows® 10 64-bit
• Windows® 7 64-bit

Devices Supported:

Radeon E9260, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and all R series

AMD Embedded GPU, G-Series SOC, R-Series SOC & R-Series APU Windows® 64-bit Catalyst™ Driver

Operating Systems supported:

• Windows® 10 64-bit
• Windows® 7 64-bit

Devices Supported:

Radeon E9260, Radeon E8860,Radeon E8870, E8950, E917x, all G-series and all R series

AMD Embedded GPU, G-Series SOC, R-Series SOC & R-Series APU Windows® 64-bit Catalyst™ Driver

AMD Embedded GPU, G-Series SOC, R-Series SOC & R-Series APU Windows® 64-bit Catalyst™ Driver

Operating Systems supported:
         Windows® 10 64-bit
         Windows® 7 64-bit

Devices Supported:
         R-Series SoC (Merlin Falcon)
         2nd Gen R-Series APU (Bald Eagle)
         1st Gen R-Series APU (eTrinity FS1r2)
         1st Gen R-Series (eTrinity FP2)
         3rd Gen G-Series SoC I Family (Brown Falcon)
         3rd Gen G-Series SoC J Family (Prairie Falcon)
         2nd Gen G-Series SoC (Steppe Eagle)
         1st Gen G-Series SoC (eKabini)
         G-Series SoC (LX)
         E917x
         Radeon E9550
         Radeon E9260
         Radeon E8860
         Radeon E8870

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000LP, R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9390, E9550, E9560, E9565 and E917x series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 20.04.1 (64-bit)

Devices Supported:

• R1000LP
• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9390 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU
• E9565 dGPU

Features, Fixes and Enhancements, Known Issues:

• Release Notes

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000LP, R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9390, E9550, E9560, E9565 and E917x series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 20.04.1 (64-bit)

Devices Supported:

• R1000LP
• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9390 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU
• E9565 dGPU

Features, Fixes and Enhancements, Known Issues:

• Release Notes

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000LP, R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9390, E9550, E9560, E9565 and E917x series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 20.04.1 (64-bit)

Devices Supported:

• R1000LP
• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9390 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU
• E9565 dGPU

Features, Fixes and Enhancements, Known Issues:

• Release Notes

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000LP, R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9390, E9550, E9560, E9565 and E917x series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 20.04.1 (64-bit)

Devices Supported:

• R1000LP
• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9390 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU
• E9565 dGPU

Features, Fixes and Enhancements, Known Issues:

• Release Notes

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9390, E9550, E9560, E9565 and E917x series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 20.04 (64-bit)

Devices Supported:

• R1000LP
• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9390 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU
• E9565 dGPU

Features, Fixes and Enhancements, Known Issues:

• Release Notes

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9390, E9550, E9560, E9565 and E917x series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 20.04 (64-bit)

Devices Supported:

• R1000LP
• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9390 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU
• E9565 dGPU

Features, Fixes and Enhancements, Known Issues:

• Release Notes

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9390, E9550, E9560, E9565 and E917x series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 20.04 (64-bit)

Devices Supported:

• R1000LP
• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9390 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU
• E9565 dGPU

Features, Fixes and Enhancements, Known Issues:

• Release Notes

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9390, E9550, E9560, E9565 and E917x series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 20.04 (64-bit)

Devices Supported:

• R1000LP
• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9390 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU
• E9565 dGPU

Features, Fixes and Enhancements, Known Issues:

• Release Notes

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9390, E9550, E9560 and E917x series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 18.04.1(64-bit)

Devices Supported:

• R1000LP
• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9360 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU

Fixes and Enhancements:

1. Heavy stutters and framedrops observed after resuming from sleep.
2. Network is disabled after every suspend and resume.
3. Network fluctuations observed with 1G BEL SFP.
4. S3 Fails with network connection after 300 cycles on R1000.
5. Stuttering & Framedrops observed during 4k using mpv vaapi playback with 1x4k@60fps.
   [Workaround]: Issue not observed in latest optimized mpv(0.32) with vo=gpu option.
6. VAAPI Encode/transcoded video has corruption and artifacts while doing frame rate up scaling.
7. Sporadically hard hang observed during S3 without Network.
8. Hard hang observed while doing S3 in MST daisy chain/HUB.
9. Hard hang observed after running continuous rebooter cycles (665 cycle).
10. GPUTest fails to launch any tests.
11. Video corruption observed on playback with chromium with hardware acceleration(Fixed in Mesa).
12. SME is not enabled.
    Note: SME is not functional with amdgpu driver. Please use nomodeset for SME functionality.
13. Less throughput observed with UDP compared to TCP.
    Note: Able to achieve comparable bandwidth with UDP with IXChariot tool.
14. APU power consumption for static idle cases is on par with windows on Raven platforms.
15. Heavy stutter and tearing observed with skype video conference on R1000 LP.
16. [XGBE]: Peer to Peer network is unstable with 1/10G SFP (FC).
17. [XGBE]: Ethernet Link is showing always up on RJ45 ports of Bilby platforms.
18. [XGBE]: Hot plug failures and stability issue with longer duration performance test on Bilby platforms with RG45 ports enabled.

Known Issues and Limitations

R1000LP Issues:

1. Video corruption observed while running UnigeneHeaven.
   [Workaround]: Issue observed with latest mesa(20.1), Set AMD_DEBUG=nodmacopyimgae before running the UH, to resolve this issue.
2. Heavy stutter in slideshow presentation and Multimedia playback in dual monitor usecase.
   Note: Issue is happening due to hitting the power limit with the above use case.
3. Minor Tearing is observed while doing skype video calling in fullscreen.
4. Tearing and stutter observed in Multimedia playback of H265 1080p@60fps in dual monitor scenario along with PPT presentation in one monitor.
5. Randomly video playback with S3 fails on V1000/R1000/R1000LP with XHCI failures due to USB HW issue.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

R1000 Issues:

1. Randomly S3 fails
   [Workaround]: Issue root caused to few modules. Below are the work arounds.
   • Disable IOMMU in the BIOS.
   • AMD_DEBUG=nodcc.
   • AMD_DEBUG=nodmacopyimage.
2. 10G RJ45 SFP Transceiver not supported on Raven Platforms.
3. Not showing GPU Load in amdgpu_pm_info sysfs entry on V1000 and R1000/LP.
4. Randomly video playback with S3 fails on V1000/R1000/R1000LP with XHCI failures due to USB HW issue.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

5. User experience is very poor after hotplug on mGPU config with more than 6 monitors.

V1000:

1. More than 20 Frame drops are observed with H265 4k@60fps playback.
2. Randomly S3 fails.
   [Workaround]: Issue root caused to few modules. Below are the workarounds.
   • Disable IOMMU in the BIOS.
   • AMD_DEBUG=nodcc.
3. Failures observed in OpenCL Conformance test case execution.
4. Unigine Heaven-Extreme hang with 4x4k displays.
5. Few HSA conformance samples failed.
6. Few OpenCL with CPP tests failed.
7. On Intel CPU(I54690K) + AMD dGPU(E9260] HIP Sample- module_api results in soft hang/failure.
8. OpenCL-GL sharing samples in AMDAPPSDK fail.

Steppe Eagle:

1. Observed amdgpu load failure with ECC memory.
2. WebGLConformance Tab Crashes while running Webglconformance.
   Workaround: Don’t run all/conformance/textures/misc test cases.

Common Issues:

1. IO Page fault logs observed while loading the I2S module.
2. Mouse clicks won’t work with 10 bit feature enablement on default gnome desktop environment.
   Workaround: Use KDE plasma desktop.
   https://gitlab.gnome.org/GNOME/mutter/issues/2
3. HP Z27s monitor resolution change does not take effect sometimes.
   Recommendation: Not to use the monitor since the monitor issues HPD pulse during changing resolution causing to revert to previous/native resolution sometimes.
4. Hotplug root node of DP MST monitors in daisy chain or via Hub fails.
   Workaround: To always connect or disconnect monitors in MST configuration one by one and not at root node level.
5. sporadically soft hang observed while doing "capture profile" in Remote profiling of Hologram (RGP) on V1000/R1000.
6. Display blank out with 4G MMIO in Bios with 4.14 kernel.
   Workaround: Issue root caused to mutter. Issue not observed with Weston.
7. white screen observed when running phoronix test cases(tropics,santuary).
8. Artifacts observed during video playback with multiple 4K monitors on E9173 dGPU.
9. Display artifacts while doing S3 with max 4k monitors on APU’s.
10. Corruption on all four 4k monitors when resize the Video play back window to full screen and vice versa.
    Workaround: issue root caused to display underflow and GPU usage high indicating usage beyond hardware capability. A workaround is to disable window effects using command "gsettings set org.gnome.desktop.interface enable-animations false"
11. All MST displays goes blank while booting with MST Hub and MST off on the monitors.
12. One of the monitor going blank after doing multiple S3 with MST Hub configuration.
13. Tearing/Stutter observed during 4k@60fps playback on 2x4k monitors.
    Workaround: Use zaphord Head configuration to play 4k@60fps video on multi monitor setup.
14. Hard hang observed for Piglit tests.
    Workaround: Piglit test passed without arb_tessellation_shader-tes-gs-max-output test cases.
15. Base mark Web3.0 failed.
16. Stuttering observed with glmark2 on mGPU config.
    Workaround: Use multi screen configuration to resolve the stutter.
17. [BE]: Observed Issues with HotPlug on Bald Eagle.
18. [BE]: S3 Fails randomly on BaldEagle with IOMMU enabled.
19. Issues with refresh rate change/rotate using xrandr command.
20. Export MESA_GLES_VERSION_OVERRIDE=3.2 to run OGL ES 3.2 CTS.
21. Hot plug results in blank display of one of the monitors when using startx mode.
22. B-frame support is not available in vaapi encode.
23. MF has limitation of displaying 2 – 4K monitors, 3rd 4 K monitor will not get displayed.
24. Following OGL CTS test cases do not work
    1. GL45-CTS.stencil_texturing.functional
    2. GL45-CTS.multi_bind.dispatch_bind_textures
    3. GL45-CTS.multi_bind.dispatch_bind_image_textures
    4. GL45-CTS.arrays_of_arrays_gl.SubroutineFunctionCalls2
    5. GL45-CTS.sparse_buffer_tests.BufferStorageTest
    6. GL45-CTS.shader_atomic_counters.basic-usage-fs
    7. GL45-CTS.shader_atomic_counters.basic-usage-vs
    8. GL45-CTS.shader_atomic_counters.basic-usage-gs
    9. GL45-CTS.shader_atomic_counters.basic-usage-tes
    10. GL45-CTS.shader_atomic_counters.basic-usage-cs
    11. GL45-CTS.parallel_shader_compile.CompilationCompletionNonParallelTest
    12. GL45-CTS.parallel_shader_compile.CompilationCompletionParallelTest
    13. GL45-CTS.enhanced_layouts.ssb_member_offset_and_align
    14. GL45-CTS.enhanced_layouts.vertex_attrib_locations
    15. GL45-CTS.parallel_shader_compile.MaxShaderCompileThreadsTest

XGBE:

1. [XGBE]: Force mode(Auto negotiation disabled) is not supported in RJ45.
2. Sporadically 2.5G Network is established after a delay of more than 20 sec for SFP 2.5 on Port 0/1.
3. 10G SFP Hot plug(FC) is not working with NetGear switch(XS724EM model)
4. Can’t concurrently enable SFP+ and RJ45 interfaces.
5. No IEEE 1588 Timestamp support.
6. No receive Split header support.
7. Following features should be functional but have not been fully validated: Priority and VLAN (VLAN Priority Control), RMON Counter, VLAN support and Receive-Side scaling, 2.5G TCP/IP offload (duplex) and 2.5G jumbo frames (duplex).

Below is the type of SFP/RJ45 modules used in the XGBE validation of this release.

FreeSync:

1. Only one monitor should be attached to system.
2. The game should be running in fullscreen mode.
3. In case of mGPU, Xorg should be configured for multiscreen mode with only one monitor attached to the GPU where freesync is to be enabled. Please note that window managers should also have good support for multiscreen mode.
4. Supported only on DP.

MultiGPU:

1. Maximum framebuffer / viewport size supported by the GFX engine is 16K. When more than 8 2K monitors are arranged horizontally, we hit this limitation and corruption is observed on a few monitors. To overcome this limitation, the monitors must be re-arranged in a way that 16K limit is not exceeded. Xrandr can be used for this.
2. Beyond 8 monitors, the display doesn’t come up. Xrandr via ssh needs to be used to achieve the goal of not exceeding 16k limit.

Third Party Issues/Limitations:

1. Terminal switching results in hard hang randomly. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
2. Switching to console mode upon hotplug results in soft hang. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
3. Mpv overnight test fails with loopback option.
   Workaround: Use script for continuous playback.
4. Stutter can be observed when stream framerate and monitor refresh rate are different. This is expected phenomenon. Stutter cab be minimized with interpolation option in mpv. But it can introduce corruption and other side effects.

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9390, E9550, E9560 and E917x series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 18.04.1(64-bit)

Devices Supported:

• R1000LP
• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9360 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU

Fixes and Enhancements:

1. Heavy stutters and framedrops observed after resuming from sleep.
2. Network is disabled after every suspend and resume.
3. Network fluctuations observed with 1G BEL SFP.
4. S3 Fails with network connection after 300 cycles on R1000.
5. Stuttering & Framedrops observed during 4k using mpv vaapi playback with 1x4k@60fps.
   [Workaround]: Issue not observed in latest optimized mpv(0.32) with vo=gpu option.
6. VAAPI Encode/transcoded video has corruption and artifacts while doing frame rate up scaling.
7. Sporadically hard hang observed during S3 without Network.
8. Hard hang observed while doing S3 in MST daisy chain/HUB.
9. Hard hang observed after running continuous rebooter cycles (665 cycle).
10. GPUTest fails to launch any tests.
11. Video corruption observed on playback with chromium with hardware acceleration(Fixed in Mesa).
12. SME is not enabled.
    Note: SME is not functional with amdgpu driver. Please use nomodeset for SME functionality.
13. Less throughput observed with UDP compared to TCP.
    Note: Able to achieve comparable bandwidth with UDP with IXChariot tool.
14. APU power consumption for static idle cases is on par with windows on Raven platforms.
15. Heavy stutter and tearing observed with skype video conference on R1000 LP.
16. [XGBE]: Peer to Peer network is unstable with 1/10G SFP (FC).
17. [XGBE]: Ethernet Link is showing always up on RJ45 ports of Bilby platforms.
18. [XGBE]: Hot plug failures and stability issue with longer duration performance test on Bilby platforms with RG45 ports enabled.

Known Issues and Limitations

R1000LP Issues:

1. Video corruption observed while running UnigeneHeaven.
   [Workaround]: Issue observed with latest mesa(20.1), Set AMD_DEBUG=nodmacopyimgae before running the UH, to resolve this issue.
2. Heavy stutter in slideshow presentation and Multimedia playback in dual monitor usecase.
   Note: Issue is happening due to hitting the power limit with the above use case.
3. Minor Tearing is observed while doing skype video calling in fullscreen.
4. Tearing and stutter observed in Multimedia playback of H265 1080p@60fps in dual monitor scenario along with PPT presentation in one monitor.
5. Randomly video playback with S3 fails on V1000/R1000/R1000LP with XHCI failures due to USB HW issue.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

R1000 Issues:

1. Randomly S3 fails
   [Workaround]: Issue root caused to few modules. Below are the work arounds.
   • Disable IOMMU in the BIOS.
   • AMD_DEBUG=nodcc.
   • AMD_DEBUG=nodmacopyimage.
2. 10G RJ45 SFP Transceiver not supported on Raven Platforms.
3. Not showing GPU Load in amdgpu_pm_info sysfs entry on V1000 and R1000/LP.
4. Randomly video playback with S3 fails on V1000/R1000/R1000LP with XHCI failures due to USB HW issue.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

5. User experience is very poor after hotplug on mGPU config with more than 6 monitors.

V1000:

1. More than 20 Frame drops are observed with H265 4k@60fps playback.
2. Randomly S3 fails.
   [Workaround]: Issue root caused to few modules. Below are the workarounds.
   • Disable IOMMU in the BIOS.
   • AMD_DEBUG=nodcc.
3. Failures observed in OpenCL Conformance test case execution.
4. Unigine Heaven-Extreme hang with 4x4k displays.
5. Few HSA conformance samples failed.
6. Few OpenCL with CPP tests failed.
7. On Intel CPU(I54690K) + AMD dGPU(E9260] HIP Sample- module_api results in soft hang/failure.
8. OpenCL-GL sharing samples in AMDAPPSDK fail.

Steppe Eagle:

1. Observed amdgpu load failure with ECC memory.
2. WebGLConformance Tab Crashes while running Webglconformance.
   Workaround: Don’t run all/conformance/textures/misc test cases.

Common Issues:

1. IO Page fault logs observed while loading the I2S module.
2. Mouse clicks won’t work with 10 bit feature enablement on default gnome desktop environment.
   Workaround: Use KDE plasma desktop.
   https://gitlab.gnome.org/GNOME/mutter/issues/2
3. HP Z27s monitor resolution change does not take effect sometimes.
   Recommendation: Not to use the monitor since the monitor issues HPD pulse during changing resolution causing to revert to previous/native resolution sometimes.
4. Hotplug root node of DP MST monitors in daisy chain or via Hub fails.
   Workaround: To always connect or disconnect monitors in MST configuration one by one and not at root node level.
5. sporadically soft hang observed while doing "capture profile" in Remote profiling of Hologram (RGP) on V1000/R1000.
6. Display blank out with 4G MMIO in Bios with 4.14 kernel.
   Workaround: Issue root caused to mutter. Issue not observed with Weston.
7. white screen observed when running phoronix test cases(tropics,santuary).
8. Artifacts observed during video playback with multiple 4K monitors on E9173 dGPU.
9. Display artifacts while doing S3 with max 4k monitors on APU’s.
10. Corruption on all four 4k monitors when resize the Video play back window to full screen and vice versa.
    Workaround: issue root caused to display underflow and GPU usage high indicating usage beyond hardware capability. A workaround is to disable window effects using command "gsettings set org.gnome.desktop.interface enable-animations false"
11. All MST displays goes blank while booting with MST Hub and MST off on the monitors.
12. One of the monitor going blank after doing multiple S3 with MST Hub configuration.
13. Tearing/Stutter observed during 4k@60fps playback on 2x4k monitors.
    Workaround: Use zaphord Head configuration to play 4k@60fps video on multi monitor setup.
14. Hard hang observed for Piglit tests.
    Workaround: Piglit test passed without arb_tessellation_shader-tes-gs-max-output test cases.
15. Base mark Web3.0 failed.
16. Stuttering observed with glmark2 on mGPU config.
    Workaround: Use multi screen configuration to resolve the stutter.
17. [BE]: Observed Issues with HotPlug on Bald Eagle.
18. [BE]: S3 Fails randomly on BaldEagle with IOMMU enabled.
19. Issues with refresh rate change/rotate using xrandr command.
20. Export MESA_GLES_VERSION_OVERRIDE=3.2 to run OGL ES 3.2 CTS.
21. Hot plug results in blank display of one of the monitors when using startx mode.
22. B-frame support is not available in vaapi encode.
23. MF has limitation of displaying 2 – 4K monitors, 3rd 4 K monitor will not get displayed.
24. Following OGL CTS test cases do not work
    1. GL45-CTS.stencil_texturing.functional
    2. GL45-CTS.multi_bind.dispatch_bind_textures
    3. GL45-CTS.multi_bind.dispatch_bind_image_textures
    4. GL45-CTS.arrays_of_arrays_gl.SubroutineFunctionCalls2
    5. GL45-CTS.sparse_buffer_tests.BufferStorageTest
    6. GL45-CTS.shader_atomic_counters.basic-usage-fs
    7. GL45-CTS.shader_atomic_counters.basic-usage-vs
    8. GL45-CTS.shader_atomic_counters.basic-usage-gs
    9. GL45-CTS.shader_atomic_counters.basic-usage-tes
    10. GL45-CTS.shader_atomic_counters.basic-usage-cs
    11. GL45-CTS.parallel_shader_compile.CompilationCompletionNonParallelTest
    12. GL45-CTS.parallel_shader_compile.CompilationCompletionParallelTest
    13. GL45-CTS.enhanced_layouts.ssb_member_offset_and_align
    14. GL45-CTS.enhanced_layouts.vertex_attrib_locations
    15. GL45-CTS.parallel_shader_compile.MaxShaderCompileThreadsTest

XGBE:

1. [XGBE]: Force mode(Auto negotiation disabled) is not supported in RJ45.
2. Sporadically 2.5G Network is established after a delay of more than 20 sec for SFP 2.5 on Port 0/1.
3. 10G SFP Hot plug(FC) is not working with NetGear switch(XS724EM model)
4. Can’t concurrently enable SFP+ and RJ45 interfaces.
5. No IEEE 1588 Timestamp support.
6. No receive Split header support.
7. Following features should be functional but have not been fully validated: Priority and VLAN (VLAN Priority Control), RMON Counter, VLAN support and Receive-Side scaling, 2.5G TCP/IP offload (duplex) and 2.5G jumbo frames (duplex).

Below is the type of SFP/RJ45 modules used in the XGBE validation of this release.

FreeSync:

1. Only one monitor should be attached to system.
2. The game should be running in fullscreen mode.
3. In case of mGPU, Xorg should be configured for multiscreen mode with only one monitor attached to the GPU where freesync is to be enabled. Please note that window managers should also have good support for multiscreen mode.
4. Supported only on DP.

MultiGPU:

1. Maximum framebuffer / viewport size supported by the GFX engine is 16K. When more than 8 2K monitors are arranged horizontally, we hit this limitation and corruption is observed on a few monitors. To overcome this limitation, the monitors must be re-arranged in a way that 16K limit is not exceeded. Xrandr can be used for this.
2. Beyond 8 monitors, the display doesn’t come up. Xrandr via ssh needs to be used to achieve the goal of not exceeding 16k limit.

Third Party Issues/Limitations:

1. Terminal switching results in hard hang randomly. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
2. Switching to console mode upon hotplug results in soft hang. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
3. Mpv overnight test fails with loopback option.
   Workaround: Use script for continuous playback.
4. Stutter can be observed when stream framerate and monitor refresh rate are different. This is expected phenomenon. Stutter cab be minimized with interpolation option in mpv. But it can introduce corruption and other side effects.

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9390, E9550, E9560 and E917x series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 18.04.1(64-bit)

Devices Supported:

• R1000LP
• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9360 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU

Fixes and Enhancements:

1. Heavy stutters and framedrops observed after resuming from sleep.
2. Network is disabled after every suspend and resume.
3. Network fluctuations observed with 1G BEL SFP.
4. S3 Fails with network connection after 300 cycles on R1000.
5. Stuttering & Framedrops observed during 4k using mpv vaapi playback with 1x4k@60fps.
   [Workaround]: Issue not observed in latest optimized mpv(0.32) with vo=gpu option.
6. VAAPI Encode/transcoded video has corruption and artifacts while doing frame rate up scaling.
7. Sporadically hard hang observed during S3 without Network.
8. Hard hang observed while doing S3 in MST daisy chain/HUB.
9. Hard hang observed after running continuous rebooter cycles (665 cycle).
10. GPUTest fails to launch any tests.
11. Video corruption observed on playback with chromium with hardware acceleration(Fixed in Mesa).
12. SME is not enabled.
    Note: SME is not functional with amdgpu driver. Please use nomodeset for SME functionality.
13. Less throughput observed with UDP compared to TCP.
    Note: Able to achieve comparable bandwidth with UDP with IXChariot tool.
14. APU power consumption for static idle cases is on par with windows on Raven platforms.
15. Heavy stutter and tearing observed with skype video conference on R1000 LP.
16. [XGBE]: Peer to Peer network is unstable with 1/10G SFP (FC).
17. [XGBE]: Ethernet Link is showing always up on RJ45 ports of Bilby platforms.
18. [XGBE]: Hot plug failures and stability issue with longer duration performance test on Bilby platforms with RG45 ports enabled.

Known Issues and Limitations

R1000LP Issues:

1. Video corruption observed while running UnigeneHeaven.
   [Workaround]: Issue observed with latest mesa(20.1), Set AMD_DEBUG=nodmacopyimgae before running the UH, to resolve this issue.
2. Heavy stutter in slideshow presentation and Multimedia playback in dual monitor usecase.
   Note: Issue is happening due to hitting the power limit with the above use case.
3. Minor Tearing is observed while doing skype video calling in fullscreen.
4. Tearing and stutter observed in Multimedia playback of H265 1080p@60fps in dual monitor scenario along with PPT presentation in one monitor.
5. Randomly video playback with S3 fails on V1000/R1000/R1000LP with XHCI failures due to USB HW issue.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

R1000 Issues:

1. Randomly S3 fails
   [Workaround]: Issue root caused to few modules. Below are the work arounds.
   • Disable IOMMU in the BIOS.
   • AMD_DEBUG=nodcc.
   • AMD_DEBUG=nodmacopyimage.
2. 10G RJ45 SFP Transceiver not supported on Raven Platforms.
3. Not showing GPU Load in amdgpu_pm_info sysfs entry on V1000 and R1000/LP.
4. Randomly video playback with S3 fails on V1000/R1000/R1000LP with XHCI failures due to USB HW issue.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

5. User experience is very poor after hotplug on mGPU config with more than 6 monitors.

V1000:

1. More than 20 Frame drops are observed with H265 4k@60fps playback.
2. Randomly S3 fails.
   [Workaround]: Issue root caused to few modules. Below are the workarounds.
   • Disable IOMMU in the BIOS.
   • AMD_DEBUG=nodcc.
3. Failures observed in OpenCL Conformance test case execution.
4. Unigine Heaven-Extreme hang with 4x4k displays.
5. Few HSA conformance samples failed.
6. Few OpenCL with CPP tests failed.
7. On Intel CPU(I54690K) + AMD dGPU(E9260] HIP Sample- module_api results in soft hang/failure.
8. OpenCL-GL sharing samples in AMDAPPSDK fail.

Steppe Eagle:

1. Observed amdgpu load failure with ECC memory.
2. WebGLConformance Tab Crashes while running Webglconformance.
   Workaround: Don’t run all/conformance/textures/misc test cases.

Common Issues:

1. IO Page fault logs observed while loading the I2S module.
2. Mouse clicks won’t work with 10 bit feature enablement on default gnome desktop environment.
   Workaround: Use KDE plasma desktop.
   https://gitlab.gnome.org/GNOME/mutter/issues/2
3. HP Z27s monitor resolution change does not take effect sometimes.
   Recommendation: Not to use the monitor since the monitor issues HPD pulse during changing resolution causing to revert to previous/native resolution sometimes.
4. Hotplug root node of DP MST monitors in daisy chain or via Hub fails.
   Workaround: To always connect or disconnect monitors in MST configuration one by one and not at root node level.
5. sporadically soft hang observed while doing "capture profile" in Remote profiling of Hologram (RGP) on V1000/R1000.
6. Display blank out with 4G MMIO in Bios with 4.14 kernel.
   Workaround: Issue root caused to mutter. Issue not observed with Weston.
7. white screen observed when running phoronix test cases(tropics,santuary).
8. Artifacts observed during video playback with multiple 4K monitors on E9173 dGPU.
9. Display artifacts while doing S3 with max 4k monitors on APU’s.
10. Corruption on all four 4k monitors when resize the Video play back window to full screen and vice versa.
    Workaround: issue root caused to display underflow and GPU usage high indicating usage beyond hardware capability. A workaround is to disable window effects using command "gsettings set org.gnome.desktop.interface enable-animations false"
11. All MST displays goes blank while booting with MST Hub and MST off on the monitors.
12. One of the monitor going blank after doing multiple S3 with MST Hub configuration.
13. Tearing/Stutter observed during 4k@60fps playback on 2x4k monitors.
    Workaround: Use zaphord Head configuration to play 4k@60fps video on multi monitor setup.
14. Hard hang observed for Piglit tests.
    Workaround: Piglit test passed without arb_tessellation_shader-tes-gs-max-output test cases.
15. Base mark Web3.0 failed.
16. Stuttering observed with glmark2 on mGPU config.
    Workaround: Use multi screen configuration to resolve the stutter.
17. [BE]: Observed Issues with HotPlug on Bald Eagle.
18. [BE]: S3 Fails randomly on BaldEagle with IOMMU enabled.
19. Issues with refresh rate change/rotate using xrandr command.
20. Export MESA_GLES_VERSION_OVERRIDE=3.2 to run OGL ES 3.2 CTS.
21. Hot plug results in blank display of one of the monitors when using startx mode.
22. B-frame support is not available in vaapi encode.
23. MF has limitation of displaying 2 – 4K monitors, 3rd 4 K monitor will not get displayed.
24. Following OGL CTS test cases do not work
    1. GL45-CTS.stencil_texturing.functional
    2. GL45-CTS.multi_bind.dispatch_bind_textures
    3. GL45-CTS.multi_bind.dispatch_bind_image_textures
    4. GL45-CTS.arrays_of_arrays_gl.SubroutineFunctionCalls2
    5. GL45-CTS.sparse_buffer_tests.BufferStorageTest
    6. GL45-CTS.shader_atomic_counters.basic-usage-fs
    7. GL45-CTS.shader_atomic_counters.basic-usage-vs
    8. GL45-CTS.shader_atomic_counters.basic-usage-gs
    9. GL45-CTS.shader_atomic_counters.basic-usage-tes
    10. GL45-CTS.shader_atomic_counters.basic-usage-cs
    11. GL45-CTS.parallel_shader_compile.CompilationCompletionNonParallelTest
    12. GL45-CTS.parallel_shader_compile.CompilationCompletionParallelTest
    13. GL45-CTS.enhanced_layouts.ssb_member_offset_and_align
    14. GL45-CTS.enhanced_layouts.vertex_attrib_locations
    15. GL45-CTS.parallel_shader_compile.MaxShaderCompileThreadsTest

XGBE:

1. [XGBE]: Force mode(Auto negotiation disabled) is not supported in RJ45.
2. Sporadically 2.5G Network is established after a delay of more than 20 sec for SFP 2.5 on Port 0/1.
3. 10G SFP Hot plug(FC) is not working with NetGear switch(XS724EM model)
4. Can’t concurrently enable SFP+ and RJ45 interfaces.
5. No IEEE 1588 Timestamp support.
6. No receive Split header support.
7. Following features should be functional but have not been fully validated: Priority and VLAN (VLAN Priority Control), RMON Counter, VLAN support and Receive-Side scaling, 2.5G TCP/IP offload (duplex) and 2.5G jumbo frames (duplex).

Below is the type of SFP/RJ45 modules used in the XGBE validation of this release.

FreeSync:

1. Only one monitor should be attached to system.
2. The game should be running in fullscreen mode.
3. In case of mGPU, Xorg should be configured for multiscreen mode with only one monitor attached to the GPU where freesync is to be enabled. Please note that window managers should also have good support for multiscreen mode.
4. Supported only on DP.

MultiGPU:

1. Maximum framebuffer / viewport size supported by the GFX engine is 16K. When more than 8 2K monitors are arranged horizontally, we hit this limitation and corruption is observed on a few monitors. To overcome this limitation, the monitors must be re-arranged in a way that 16K limit is not exceeded. Xrandr can be used for this.
2. Beyond 8 monitors, the display doesn’t come up. Xrandr via ssh needs to be used to achieve the goal of not exceeding 16k limit.

Third Party Issues/Limitations:

1. Terminal switching results in hard hang randomly. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
2. Switching to console mode upon hotplug results in soft hang. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
3. Mpv overnight test fails with loopback option.
   Workaround: Use script for continuous playback.
4. Stutter can be observed when stream framerate and monitor refresh rate are different. This is expected phenomenon. Stutter cab be minimized with interpolation option in mpv. But it can introduce corruption and other side effects.

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9390, E9550, E9560 and E917x series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 18.04.1(64-bit)

Devices Supported:

• R1000LP
• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9360 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU

Fixes and Enhancements:

1. Heavy stutters and framedrops observed after resuming from sleep.
2. Network is disabled after every suspend and resume.
3. Network fluctuations observed with 1G BEL SFP.
4. S3 Fails with network connection after 300 cycles on R1000.
5. Stuttering & Framedrops observed during 4k using mpv vaapi playback with 1x4k@60fps.
   [Workaround]: Issue not observed in latest optimized mpv(0.32) with vo=gpu option.
6. VAAPI Encode/transcoded video has corruption and artifacts while doing frame rate up scaling.
7. Sporadically hard hang observed during S3 without Network.
8. Hard hang observed while doing S3 in MST daisy chain/HUB.
9. Hard hang observed after running continuous rebooter cycles (665 cycle).
10. GPUTest fails to launch any tests.
11. Video corruption observed on playback with chromium with hardware acceleration(Fixed in Mesa).
12. SME is not enabled.
    Note: SME is not functional with amdgpu driver. Please use nomodeset for SME functionality.
13. Less throughput observed with UDP compared to TCP.
    Note: Able to achieve comparable bandwidth with UDP with IXChariot tool.
14. APU power consumption for static idle cases is on par with windows on Raven platforms.
15. Heavy stutter and tearing observed with skype video conference on R1000 LP.
16. [XGBE]: Peer to Peer network is unstable with 1/10G SFP (FC).
17. [XGBE]: Ethernet Link is showing always up on RJ45 ports of Bilby platforms.
18. [XGBE]: Hot plug failures and stability issue with longer duration performance test on Bilby platforms with RG45 ports enabled.

Known Issues and Limitations

R1000LP Issues:

1. Video corruption observed while running UnigeneHeaven.
   [Workaround]: Issue observed with latest mesa(20.1), Set AMD_DEBUG=nodmacopyimgae before running the UH, to resolve this issue.
2. Heavy stutter in slideshow presentation and Multimedia playback in dual monitor usecase.
   Note: Issue is happening due to hitting the power limit with the above use case.
3. Minor Tearing is observed while doing skype video calling in fullscreen.
4. Tearing and stutter observed in Multimedia playback of H265 1080p@60fps in dual monitor scenario along with PPT presentation in one monitor.
5. Randomly video playback with S3 fails on V1000/R1000/R1000LP with XHCI failures due to USB HW issue.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

R1000 Issues:

1. Randomly S3 fails
   [Workaround]: Issue root caused to few modules. Below are the work arounds.
   • Disable IOMMU in the BIOS.
   • AMD_DEBUG=nodcc.
   • AMD_DEBUG=nodmacopyimage.
2. 10G RJ45 SFP Transceiver not supported on Raven Platforms.
3. Not showing GPU Load in amdgpu_pm_info sysfs entry on V1000 and R1000/LP.
4. Randomly video playback with S3 fails on V1000/R1000/R1000LP with XHCI failures due to USB HW issue.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

5. User experience is very poor after hotplug on mGPU config with more than 6 monitors.

V1000:

1. More than 20 Frame drops are observed with H265 4k@60fps playback.
2. Randomly S3 fails.
   [Workaround]: Issue root caused to few modules. Below are the workarounds.
   • Disable IOMMU in the BIOS.
   • AMD_DEBUG=nodcc.
3. Failures observed in OpenCL Conformance test case execution.
4. Unigine Heaven-Extreme hang with 4x4k displays.
5. Few HSA conformance samples failed.
6. Few OpenCL with CPP tests failed.
7. On Intel CPU(I54690K) + AMD dGPU(E9260] HIP Sample- module_api results in soft hang/failure.
8. OpenCL-GL sharing samples in AMDAPPSDK fail.

Steppe Eagle:

1. Observed amdgpu load failure with ECC memory.
2. WebGLConformance Tab Crashes while running Webglconformance.
   Workaround: Don’t run all/conformance/textures/misc test cases.

Common Issues:

1. IO Page fault logs observed while loading the I2S module.
2. Mouse clicks won’t work with 10 bit feature enablement on default gnome desktop environment.
   Workaround: Use KDE plasma desktop.
   https://gitlab.gnome.org/GNOME/mutter/issues/2
3. HP Z27s monitor resolution change does not take effect sometimes.
   Recommendation: Not to use the monitor since the monitor issues HPD pulse during changing resolution causing to revert to previous/native resolution sometimes.
4. Hotplug root node of DP MST monitors in daisy chain or via Hub fails.
   Workaround: To always connect or disconnect monitors in MST configuration one by one and not at root node level.
5. sporadically soft hang observed while doing "capture profile" in Remote profiling of Hologram (RGP) on V1000/R1000.
6. Display blank out with 4G MMIO in Bios with 4.14 kernel.
   Workaround: Issue root caused to mutter. Issue not observed with Weston.
7. white screen observed when running phoronix test cases(tropics,santuary).
8. Artifacts observed during video playback with multiple 4K monitors on E9173 dGPU.
9. Display artifacts while doing S3 with max 4k monitors on APU’s.
10. Corruption on all four 4k monitors when resize the Video play back window to full screen and vice versa.
    Workaround: issue root caused to display underflow and GPU usage high indicating usage beyond hardware capability. A workaround is to disable window effects using command "gsettings set org.gnome.desktop.interface enable-animations false"
11. All MST displays goes blank while booting with MST Hub and MST off on the monitors.
12. One of the monitor going blank after doing multiple S3 with MST Hub configuration.
13. Tearing/Stutter observed during 4k@60fps playback on 2x4k monitors.
    Workaround: Use zaphord Head configuration to play 4k@60fps video on multi monitor setup.
14. Hard hang observed for Piglit tests.
    Workaround: Piglit test passed without arb_tessellation_shader-tes-gs-max-output test cases.
15. Base mark Web3.0 failed.
16. Stuttering observed with glmark2 on mGPU config.
    Workaround: Use multi screen configuration to resolve the stutter.
17. [BE]: Observed Issues with HotPlug on Bald Eagle.
18. [BE]: S3 Fails randomly on BaldEagle with IOMMU enabled.
19. Issues with refresh rate change/rotate using xrandr command.
20. Export MESA_GLES_VERSION_OVERRIDE=3.2 to run OGL ES 3.2 CTS.
21. Hot plug results in blank display of one of the monitors when using startx mode.
22. B-frame support is not available in vaapi encode.
23. MF has limitation of displaying 2 – 4K monitors, 3rd 4 K monitor will not get displayed.
24. Following OGL CTS test cases do not work
    1. GL45-CTS.stencil_texturing.functional
    2. GL45-CTS.multi_bind.dispatch_bind_textures
    3. GL45-CTS.multi_bind.dispatch_bind_image_textures
    4. GL45-CTS.arrays_of_arrays_gl.SubroutineFunctionCalls2
    5. GL45-CTS.sparse_buffer_tests.BufferStorageTest
    6. GL45-CTS.shader_atomic_counters.basic-usage-fs
    7. GL45-CTS.shader_atomic_counters.basic-usage-vs
    8. GL45-CTS.shader_atomic_counters.basic-usage-gs
    9. GL45-CTS.shader_atomic_counters.basic-usage-tes
    10. GL45-CTS.shader_atomic_counters.basic-usage-cs
    11. GL45-CTS.parallel_shader_compile.CompilationCompletionNonParallelTest
    12. GL45-CTS.parallel_shader_compile.CompilationCompletionParallelTest
    13. GL45-CTS.enhanced_layouts.ssb_member_offset_and_align
    14. GL45-CTS.enhanced_layouts.vertex_attrib_locations
    15. GL45-CTS.parallel_shader_compile.MaxShaderCompileThreadsTest

XGBE:

1. [XGBE]: Force mode(Auto negotiation disabled) is not supported in RJ45.
2. Sporadically 2.5G Network is established after a delay of more than 20 sec for SFP 2.5 on Port 0/1.
3. 10G SFP Hot plug(FC) is not working with NetGear switch(XS724EM model)
4. Can’t concurrently enable SFP+ and RJ45 interfaces.
5. No IEEE 1588 Timestamp support.
6. No receive Split header support.
7. Following features should be functional but have not been fully validated: Priority and VLAN (VLAN Priority Control), RMON Counter, VLAN support and Receive-Side scaling, 2.5G TCP/IP offload (duplex) and 2.5G jumbo frames (duplex).

Below is the type of SFP/RJ45 modules used in the XGBE validation of this release.

FreeSync:

1. Only one monitor should be attached to system.
2. The game should be running in fullscreen mode.
3. In case of mGPU, Xorg should be configured for multiscreen mode with only one monitor attached to the GPU where freesync is to be enabled. Please note that window managers should also have good support for multiscreen mode.
4. Supported only on DP.

MultiGPU:

1. Maximum framebuffer / viewport size supported by the GFX engine is 16K. When more than 8 2K monitors are arranged horizontally, we hit this limitation and corruption is observed on a few monitors. To overcome this limitation, the monitors must be re-arranged in a way that 16K limit is not exceeded. Xrandr can be used for this.
2. Beyond 8 monitors, the display doesn’t come up. Xrandr via ssh needs to be used to achieve the goal of not exceeding 16k limit.

Third Party Issues/Limitations:

1. Terminal switching results in hard hang randomly. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
2. Switching to console mode upon hotplug results in soft hang. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
3. Mpv overnight test fails with loopback option.
   Workaround: Use script for continuous playback.
4. Stutter can be observed when stream framerate and monitor refresh rate are different. This is expected phenomenon. Stutter cab be minimized with interpolation option in mpv. But it can introduce corruption and other side effects.

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9360 E9550, E9560 and E9710 series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 18.04.1(64-bit)

Devices Supported:

• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9360 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU

Fixes and Enhancements:

1. MST not working with PCIe daughter card(Passive adapter card) on BE.
2. Bluesh artifacts on Unigine heaven benchmark with Antialiasing on.
3. Hard hang with mpv vaapi-vappi configuration in fullscreen mode on V1000.
4. Display artifacts while doing S3 on dGPU’s.
5. Few resolutions were not get applied on LG 4k monitors.
6. Tearing observed while playing youtube video in chrome.
7. Pink splash screen after rebooting with HDMI(DP-HDMI) cable.
8. Stutter observed with 4k@60 video playback on V1000/R1000.
9. Hard hang observed with MST (Daisy Chain) and S3 on V1000.
10. Incorrect R/W speed is observed in SD card UHSI-SDR104 in UEFI mode on Bilby platforms.
11. Intermediately stuck while doing S3 on MF and PF.
12. S3 Fails on Steppe eagle.
13. S3 Fails on PF.
14. MST not working on BE.(Note: please add amdgpu.dc=1 for BE/SE).
15. Randomly corruption and softhang observed with S3 and MST on MF.
16. Display goes blank after hotplug of third monitor on V1000.
17. Glmark2 overnight hang.
18. Reboot fails on V1000-NPU.
19. Stutter observed for few samples of Furmark benchmark.
20. Display blank out with 4G MMIO in Bios with 4.19 kernel.
21. Sporadically minor stutter observed with 1080p playback using HDMI in multiple playbacks.
22. Corruption and flickering are observed on all monitors when booted with combination of MST Enabled and normal monitors.
23. Stuttering observed with VDPAU playback on H264 60fps streams in Fullscreen mode.
24. One of the monitor going blank after doing multiple S3 with MST Daisy chain on V1000/R1000.
25. I2S Audio one side of headset is not audible while playing i2S audio on V1000/R1000.
26. Remote profiling of Hologram in target - Shader frequency is low while capturing the profile in Host on V1000/R1000.

Known Issues and Limitations

R1000:

1. Soft hang observed on Video Playback and S3 in MST (Daisy Chain).
2. Gst-omx Transcode fails with latest mesa(19.2).
   Workaround: copy AMD_Ubuntu-18.04_Kernel_4.19.8_v2019_30_XXXX/binaries/userspace/libomxil-bellagio_new/libomx_mesa.so to /opt/amdgpu-emb/lib/libomxil-bellagio0/
3. Not showing GPU Load in amdgpu_pm_info sysfs entry on V1000 and R1000.
4. Randomly video playback with S3 fails while doing manually on 4.19 kernel.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

5. User experience is very poor after hotplug on mGPU config with more than 6 monitors.
6. Stuttering is observed with vulkan hologram sample on 4k monitor full screen mode.

V1000:

1. S3 Fails at 25th cycle on Dibbler V1000 due to PSP bug.
2. Failures observed in OpenCL Conformance test case execution.
3. Note: Issue root caused gnome which is third party component.
4. Unigine Heaven-Extreme hang with 4x4k displays.
5. Few HSA conformance samples failed.
6. Few OpenCL with CPP tests failed.
7. On Intel CPU(I54690K) + AMD dGPU(E9260] HIP Sample- module_api results in soft hang/failure.
8. OpenCL-GL sharing samples in AMDAPPSDK fail.

Steppe Eagle:

1. Observed amdgpu load failure with ECC memory.
2. WebGLConformance Tab Crashes while running Webglconformance.
   Workaround: Don’t run all/conformance/textures/misc test cases.

Common Issues:

1. Mouse clicks won’t work with 10 bit feature enablement on default gnome desktop environment.
   Workaround: Use KDE plasma desktop.
   https://gitlab.gnome.org/GNOME/mutter/issues/2
2. HP Z27s monitor resolution change does not take effect sometimes.
   Recommendation: Not to use the monitor since the monitor issues HPD pulse during changing resolution causing to revert to previous/native resolution sometimes.
3. Hotplug root node of DP MST monitors in daisy chain or via Hub fails.
   Workaround: To always connect or disconnect monitors in MST configuration one by one and not at root node level.
4. sporadically soft hang observed while doing "capture profile" in Remote profiling of Hologram (RGP) on V1000/R1000.
5. Display blank out with 4G MMIO in Bios with 4.14 kernel.
6. white screen observed when running phoronix test cases(tropics,santuary).
7. Artifacts observed during video playback with multiple 4K monitors on E9173 dGPU.
8. Display artifacts while doing S3 with max 4k monitors on APU’s.
9. Corruption on all four 4k monitors when resize the Video play back window to full screen and vice versa.
   Workaround: issue root caused to display underflow and GPU usage high indicating usage beyond hardware capability. A workaround is to disable window effects using command "gsettings set org.gnome.desktop.interface enable-animations false"
10. All MST displays goes blank while booting with MST Hub and MST off on the monitors.
11. One of the monitor going blank after doing multiple S3 with MST Hub configuration.
12. Tearing/Stutter observed during 4k@60fps playback on 2x4k monitors.
    Workaround: Use zaphord Head configuration to play 4k@60fps video on multi monitor setup.
13. Hard hang observed for Piglit tests.
    Workaround: Piglit test passed without arb_tessellation_shader-tes-gs-max-output test cases.
14. Base mark Web3.0 failed.
15. Stuttering observed with glmark2 on mGPU config.
    Workaround: Use multi screen configuration to resolve the stutter.
16. [BE]: Observed Issues with HotPlug on Bald Eagle.
17. [BE]: S3 Fails randomly on BaldEagle with IOMMU enabled.
18. Issues with refresh rate change/rotate using xrandr command.
19. Export MESA_GLES_VERSION_OVERRIDE=3.2 to run OGL ES 3.2 CTS.
20. Hot plug results in blank display of one of the monitors when using startx mode.
21. B-frame support is not available in vaapi encode.
22. MF has limitation of displaying 2 – 4K monitors, 3rd 4 K monitor will not get displayed.
23. Following OGL CTS test cases do not work
    1. GL45-CTS.stencil_texturing.functional
    2. GL45-CTS.multi_bind.dispatch_bind_textures
    3. GL45-CTS.multi_bind.dispatch_bind_image_textures
    4. GL45-CTS.arrays_of_arrays_gl.SubroutineFunctionCalls2
    5. GL45-CTS.sparse_buffer_tests.BufferStorageTest
    6. GL45-CTS.shader_atomic_counters.basic-usage-fs
    7. GL45-CTS.shader_atomic_counters.basic-usage-vs
    8. GL45-CTS.shader_atomic_counters.basic-usage-gs
    9. GL45-CTS.shader_atomic_counters.basic-usage-tes
    10. GL45-CTS.shader_atomic_counters.basic-usage-cs
    11. GL45-CTS.parallel_shader_compile.CompilationCompletionNonParallelTest
    12. GL45-CTS.parallel_shader_compile.CompilationCompletionParallelTest
    13. GL45-CTS.enhanced_layouts.ssb_member_offset_and_align
    14. GL45-CTS.enhanced_layouts.vertex_attrib_
    15. GL45-CTS.parallel_shader_compile.MaxShaderCompileThreadsTest

XGBE:

1. SFP wont work on V1807 platforms after few hours.
2. Ethernet Link is showing always up on RJ45 ports of Bilby platforms.
   Workaround: Disable the port which is not connected the ethernet cable.
3. Hot plug failures and stability issue with longer duration performance test on Bilby platforms with RG45 ports enabled.
   Workaround: Disable the port which is not connected the ethernet cable.
4. Peer to Peer network is unstable with 1/10G SFP (FC).
5. Can’t concurrently enable SFP+ and RJ45 interfaces.
6. No IEEE 1588 Timestamp support.
7. No receive Split header support.
8. Following features should be functional but have not been fully validated: Priority and VLAN (VLAN Priority Control), RMON Counter, VLAN support and Receive-Side scaling, 2.5G TCP/IP offload (duplex) and 2.5G jumbo frames (duplex).

   Below is the type of SFP/RJ45 modules used in the XGBE validation of this release.

   Type	Model
   1G SFP - RJ45	BEL
   1G SFP - RJ45	Finisar
   10G SFP+ passive direct cable	Finisar
   10G SFP optical	Finisar
   10G SFP optical	Intel
   10G SFP optical	Intel

FreeSync:

1. Only one monitor should be attached to system.
2. The game should be running in fullscreen mode.
3. In case of mGPU, Xorg should be configured for multiscreen mode with only one monitor attached to the GPU where freesync is to be enabled. Please note that window managers should also have good support for multiscreen mode.
4. Supported only on DP.

MultiGPU:

1. Maximum framebuffer / viewport size supported by the GFX engine is 16K. When more than 8 2K monitors are arranged horizontally, we hit this limitation and corruption is observed on a few monitors. To overcome this limitation, the monitors must be re-arranged in a way that 16K limit is not exceeded. Xrandr can be used for this.
2. Beyond 8 monitors, the display doesn’t come up. Xrandr via ssh needs to be used to achieve the goal of not exceeding 16k limit.

Third Party Issues/Limitations:

1. Terminal switching results in hard hang randomly. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
2. Switching to console mode upon hotplug results in soft hang. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
3. Mpv overnight test fails with loopback option.
   Workaround: Use script for continuous playback.
4. Stutter can be observed when stream framerate and monitor refresh rate are different. This is expected phenomenon. Stutter cab be minimized with interpolation option in mpv. But it can introduce corruption and other side effects.

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9360 E9550, E9560 and E9710 series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 18.04.1(64-bit)

Devices Supported:

• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9360 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU

Fixes and Enhancements:

1. MST not working with PCIe daughter card(Passive adapter card) on BE.
2. Bluesh artifacts on Unigine heaven benchmark with Antialiasing on.
3. Hard hang with mpv vaapi-vappi configuration in fullscreen mode on V1000.
4. Display artifacts while doing S3 on dGPU’s.
5. Few resolutions were not get applied on LG 4k monitors.
6. Tearing observed while playing youtube video in chrome.
7. Pink splash screen after rebooting with HDMI(DP-HDMI) cable.
8. Stutter observed with 4k@60 video playback on V1000/R1000.
9. Hard hang observed with MST (Daisy Chain) and S3 on V1000.
10. Incorrect R/W speed is observed in SD card UHSI-SDR104 in UEFI mode on Bilby platforms.
11. Intermediately stuck while doing S3 on MF and PF.
12. S3 Fails on Steppe eagle.
13. S3 Fails on PF.
14. MST not working on BE.(Note: please add amdgpu.dc=1 for BE/SE).
15. Randomly corruption and softhang observed with S3 and MST on MF.
16. Display goes blank after hotplug of third monitor on V1000.
17. Glmark2 overnight hang.
18. Reboot fails on V1000-NPU.
19. Stutter observed for few samples of Furmark benchmark.
20. Display blank out with 4G MMIO in Bios with 4.19 kernel.
21. Sporadically minor stutter observed with 1080p playback using HDMI in multiple playbacks.
22. Corruption and flickering are observed on all monitors when booted with combination of MST Enabled and normal monitors.
23. Stuttering observed with VDPAU playback on H264 60fps streams in Fullscreen mode.
24. One of the monitor going blank after doing multiple S3 with MST Daisy chain on V1000/R1000.
25. I2S Audio one side of headset is not audible while playing i2S audio on V1000/R1000.
26. Remote profiling of Hologram in target - Shader frequency is low while capturing the profile in Host on V1000/R1000.

Known Issues and Limitations

R1000:

1. Soft hang observed on Video Playback and S3 in MST (Daisy Chain).
2. Gst-omx Transcode fails with latest mesa(19.2).
   Workaround: copy AMD_Ubuntu-18.04_Kernel_4.19.8_v2019_30_XXXX/binaries/userspace/libomxil-bellagio_new/libomx_mesa.so to /opt/amdgpu-emb/lib/libomxil-bellagio0/
3. Not showing GPU Load in amdgpu_pm_info sysfs entry on V1000 and R1000.
4. Randomly video playback with S3 fails while doing manually on 4.19 kernel.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

5. User experience is very poor after hotplug on mGPU config with more than 6 monitors.
6. Stuttering is observed with vulkan hologram sample on 4k monitor full screen mode.

V1000:

1. S3 Fails at 25th cycle on Dibbler V1000 due to PSP bug.
2. Failures observed in OpenCL Conformance test case execution.
3. Note: Issue root caused gnome which is third party component.
4. Unigine Heaven-Extreme hang with 4x4k displays.
5. Few HSA conformance samples failed.
6. Few OpenCL with CPP tests failed.
7. On Intel CPU(I54690K) + AMD dGPU(E9260] HIP Sample- module_api results in soft hang/failure.
8. OpenCL-GL sharing samples in AMDAPPSDK fail.

Steppe Eagle:

1. Observed amdgpu load failure with ECC memory.
2. WebGLConformance Tab Crashes while running Webglconformance.
   Workaround: Don’t run all/conformance/textures/misc test cases.

Common Issues:

1. Mouse clicks won’t work with 10 bit feature enablement on default gnome desktop environment.
   Workaround: Use KDE plasma desktop.
   https://gitlab.gnome.org/GNOME/mutter/issues/2
2. HP Z27s monitor resolution change does not take effect sometimes.
   Recommendation: Not to use the monitor since the monitor issues HPD pulse during changing resolution causing to revert to previous/native resolution sometimes.
3. Hotplug root node of DP MST monitors in daisy chain or via Hub fails.
   Workaround: To always connect or disconnect monitors in MST configuration one by one and not at root node level.
4. sporadically soft hang observed while doing "capture profile" in Remote profiling of Hologram (RGP) on V1000/R1000.
5. Display blank out with 4G MMIO in Bios with 4.14 kernel.
6. white screen observed when running phoronix test cases(tropics,santuary).
7. Artifacts observed during video playback with multiple 4K monitors on E9173 dGPU.
8. Display artifacts while doing S3 with max 4k monitors on APU’s.
9. Corruption on all four 4k monitors when resize the Video play back window to full screen and vice versa.
   Workaround: issue root caused to display underflow and GPU usage high indicating usage beyond hardware capability. A workaround is to disable window effects using command "gsettings set org.gnome.desktop.interface enable-animations false"
10. All MST displays goes blank while booting with MST Hub and MST off on the monitors.
11. One of the monitor going blank after doing multiple S3 with MST Hub configuration.
12. Tearing/Stutter observed during 4k@60fps playback on 2x4k monitors.
    Workaround: Use zaphord Head configuration to play 4k@60fps video on multi monitor setup.
13. Hard hang observed for Piglit tests.
    Workaround: Piglit test passed without arb_tessellation_shader-tes-gs-max-output test cases.
14. Base mark Web3.0 failed.
15. Stuttering observed with glmark2 on mGPU config.
    Workaround: Use multi screen configuration to resolve the stutter.
16. [BE]: Observed Issues with HotPlug on Bald Eagle.
17. [BE]: S3 Fails randomly on BaldEagle with IOMMU enabled.
18. Issues with refresh rate change/rotate using xrandr command.
19. Export MESA_GLES_VERSION_OVERRIDE=3.2 to run OGL ES 3.2 CTS.
20. Hot plug results in blank display of one of the monitors when using startx mode.
21. B-frame support is not available in vaapi encode.
22. MF has limitation of displaying 2 – 4K monitors, 3rd 4 K monitor will not get displayed.
23. Following OGL CTS test cases do not work
    1. GL45-CTS.stencil_texturing.functional
    2. GL45-CTS.multi_bind.dispatch_bind_textures
    3. GL45-CTS.multi_bind.dispatch_bind_image_textures
    4. GL45-CTS.arrays_of_arrays_gl.SubroutineFunctionCalls2
    5. GL45-CTS.sparse_buffer_tests.BufferStorageTest
    6. GL45-CTS.shader_atomic_counters.basic-usage-fs
    7. GL45-CTS.shader_atomic_counters.basic-usage-vs
    8. GL45-CTS.shader_atomic_counters.basic-usage-gs
    9. GL45-CTS.shader_atomic_counters.basic-usage-tes
    10. GL45-CTS.shader_atomic_counters.basic-usage-cs
    11. GL45-CTS.parallel_shader_compile.CompilationCompletionNonParallelTest
    12. GL45-CTS.parallel_shader_compile.CompilationCompletionParallelTest
    13. GL45-CTS.enhanced_layouts.ssb_member_offset_and_align
    14. GL45-CTS.enhanced_layouts.vertex_attrib_
    15. GL45-CTS.parallel_shader_compile.MaxShaderCompileThreadsTest

XGBE:

1. SFP wont work on V1807 platforms after few hours.
2. Ethernet Link is showing always up on RJ45 ports of Bilby platforms.
   Workaround: Disable the port which is not connected the ethernet cable.
3. Hot plug failures and stability issue with longer duration performance test on Bilby platforms with RG45 ports enabled.
   Workaround: Disable the port which is not connected the ethernet cable.
4. Peer to Peer network is unstable with 1/10G SFP (FC).
5. Can’t concurrently enable SFP+ and RJ45 interfaces.
6. No IEEE 1588 Timestamp support.
7. No receive Split header support.
8. Following features should be functional but have not been fully validated: Priority and VLAN (VLAN Priority Control), RMON Counter, VLAN support and Receive-Side scaling, 2.5G TCP/IP offload (duplex) and 2.5G jumbo frames (duplex).

   Below is the type of SFP/RJ45 modules used in the XGBE validation of this release.

   Type	Model
   1G SFP - RJ45	BEL
   1G SFP - RJ45	Finisar
   10G SFP+ passive direct cable	Finisar
   10G SFP optical	Finisar
   10G SFP optical	Intel
   10G SFP optical	Intel

FreeSync:

1. Only one monitor should be attached to system.
2. The game should be running in fullscreen mode.
3. In case of mGPU, Xorg should be configured for multiscreen mode with only one monitor attached to the GPU where freesync is to be enabled. Please note that window managers should also have good support for multiscreen mode.
4. Supported only on DP.

MultiGPU:

1. Maximum framebuffer / viewport size supported by the GFX engine is 16K. When more than 8 2K monitors are arranged horizontally, we hit this limitation and corruption is observed on a few monitors. To overcome this limitation, the monitors must be re-arranged in a way that 16K limit is not exceeded. Xrandr can be used for this.
2. Beyond 8 monitors, the display doesn’t come up. Xrandr via ssh needs to be used to achieve the goal of not exceeding 16k limit.

Third Party Issues/Limitations:

1. Terminal switching results in hard hang randomly. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
2. Switching to console mode upon hotplug results in soft hang. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
3. Mpv overnight test fails with loopback option.
   Workaround: Use script for continuous playback.
4. Stutter can be observed when stream framerate and monitor refresh rate are different. This is expected phenomenon. Stutter cab be minimized with interpolation option in mpv. But it can introduce corruption and other side effects.

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9360 E9550, E9560 and E9710 series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 18.04.1(64-bit)

Devices Supported:

• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9360 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU

Fixes and Enhancements:

1. MST not working with PCIe daughter card(Passive adapter card) on BE.
2. Bluesh artifacts on Unigine heaven benchmark with Antialiasing on.
3. Hard hang with mpv vaapi-vappi configuration in fullscreen mode on V1000.
4. Display artifacts while doing S3 on dGPU’s.
5. Few resolutions were not get applied on LG 4k monitors.
6. Tearing observed while playing youtube video in chrome.
7. Pink splash screen after rebooting with HDMI(DP-HDMI) cable.
8. Stutter observed with 4k@60 video playback on V1000/R1000.
9. Hard hang observed with MST (Daisy Chain) and S3 on V1000.
10. Incorrect R/W speed is observed in SD card UHSI-SDR104 in UEFI mode on Bilby platforms.
11. Intermediately stuck while doing S3 on MF and PF.
12. S3 Fails on Steppe eagle.
13. S3 Fails on PF.
14. MST not working on BE.(Note: please add amdgpu.dc=1 for BE/SE).
15. Randomly corruption and softhang observed with S3 and MST on MF.
16. Display goes blank after hotplug of third monitor on V1000.
17. Glmark2 overnight hang.
18. Reboot fails on V1000-NPU.
19. Stutter observed for few samples of Furmark benchmark.
20. Display blank out with 4G MMIO in Bios with 4.19 kernel.
21. Sporadically minor stutter observed with 1080p playback using HDMI in multiple playbacks.
22. Corruption and flickering are observed on all monitors when booted with combination of MST Enabled and normal monitors.
23. Stuttering observed with VDPAU playback on H264 60fps streams in Fullscreen mode.
24. One of the monitor going blank after doing multiple S3 with MST Daisy chain on V1000/R1000.
25. I2S Audio one side of headset is not audible while playing i2S audio on V1000/R1000.
26. Remote profiling of Hologram in target - Shader frequency is low while capturing the profile in Host on V1000/R1000.

Known Issues and Limitations

R1000:

1. Soft hang observed on Video Playback and S3 in MST (Daisy Chain).
2. Gst-omx Transcode fails with latest mesa(19.2).
   Workaround: copy AMD_Ubuntu-18.04_Kernel_4.19.8_v2019_30_XXXX/binaries/userspace/libomxil-bellagio_new/libomx_mesa.so to /opt/amdgpu-emb/lib/libomxil-bellagio0/
3. Not showing GPU Load in amdgpu_pm_info sysfs entry on V1000 and R1000.
4. Randomly video playback with S3 fails while doing manually on 4.19 kernel.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

5. User experience is very poor after hotplug on mGPU config with more than 6 monitors.
6. Stuttering is observed with vulkan hologram sample on 4k monitor full screen mode.

V1000:

1. S3 Fails at 25th cycle on Dibbler V1000 due to PSP bug.
2. Failures observed in OpenCL Conformance test case execution.
3. Note: Issue root caused gnome which is third party component.
4. Unigine Heaven-Extreme hang with 4x4k displays.
5. Few HSA conformance samples failed.
6. Few OpenCL with CPP tests failed.
7. On Intel CPU(I54690K) + AMD dGPU(E9260] HIP Sample- module_api results in soft hang/failure.
8. OpenCL-GL sharing samples in AMDAPPSDK fail.

Steppe Eagle:

1. Observed amdgpu load failure with ECC memory.
2. WebGLConformance Tab Crashes while running Webglconformance.
   Workaround: Don’t run all/conformance/textures/misc test cases.

Common Issues:

1. Mouse clicks won’t work with 10 bit feature enablement on default gnome desktop environment.
   Workaround: Use KDE plasma desktop.
   https://gitlab.gnome.org/GNOME/mutter/issues/2
2. HP Z27s monitor resolution change does not take effect sometimes.
   Recommendation: Not to use the monitor since the monitor issues HPD pulse during changing resolution causing to revert to previous/native resolution sometimes.
3. Hotplug root node of DP MST monitors in daisy chain or via Hub fails.
   Workaround: To always connect or disconnect monitors in MST configuration one by one and not at root node level.
4. sporadically soft hang observed while doing "capture profile" in Remote profiling of Hologram (RGP) on V1000/R1000.
5. Display blank out with 4G MMIO in Bios with 4.14 kernel.
6. white screen observed when running phoronix test cases(tropics,santuary).
7. Artifacts observed during video playback with multiple 4K monitors on E9173 dGPU.
8. Display artifacts while doing S3 with max 4k monitors on APU’s.
9. Corruption on all four 4k monitors when resize the Video play back window to full screen and vice versa.
   Workaround: issue root caused to display underflow and GPU usage high indicating usage beyond hardware capability. A workaround is to disable window effects using command "gsettings set org.gnome.desktop.interface enable-animations false"
10. All MST displays goes blank while booting with MST Hub and MST off on the monitors.
11. One of the monitor going blank after doing multiple S3 with MST Hub configuration.
12. Tearing/Stutter observed during 4k@60fps playback on 2x4k monitors.
    Workaround: Use zaphord Head configuration to play 4k@60fps video on multi monitor setup.
13. Hard hang observed for Piglit tests.
    Workaround: Piglit test passed without arb_tessellation_shader-tes-gs-max-output test cases.
14. Base mark Web3.0 failed.
15. Stuttering observed with glmark2 on mGPU config.
    Workaround: Use multi screen configuration to resolve the stutter.
16. [BE]: Observed Issues with HotPlug on Bald Eagle.
17. [BE]: S3 Fails randomly on BaldEagle with IOMMU enabled.
18. Issues with refresh rate change/rotate using xrandr command.
19. Export MESA_GLES_VERSION_OVERRIDE=3.2 to run OGL ES 3.2 CTS.
20. Hot plug results in blank display of one of the monitors when using startx mode.
21. B-frame support is not available in vaapi encode.
22. MF has limitation of displaying 2 – 4K monitors, 3rd 4 K monitor will not get displayed.
23. Following OGL CTS test cases do not work
    1. GL45-CTS.stencil_texturing.functional
    2. GL45-CTS.multi_bind.dispatch_bind_textures
    3. GL45-CTS.multi_bind.dispatch_bind_image_textures
    4. GL45-CTS.arrays_of_arrays_gl.SubroutineFunctionCalls2
    5. GL45-CTS.sparse_buffer_tests.BufferStorageTest
    6. GL45-CTS.shader_atomic_counters.basic-usage-fs
    7. GL45-CTS.shader_atomic_counters.basic-usage-vs
    8. GL45-CTS.shader_atomic_counters.basic-usage-gs
    9. GL45-CTS.shader_atomic_counters.basic-usage-tes
    10. GL45-CTS.shader_atomic_counters.basic-usage-cs
    11. GL45-CTS.parallel_shader_compile.CompilationCompletionNonParallelTest
    12. GL45-CTS.parallel_shader_compile.CompilationCompletionParallelTest
    13. GL45-CTS.enhanced_layouts.ssb_member_offset_and_align
    14. GL45-CTS.enhanced_layouts.vertex_attrib_
    15. GL45-CTS.parallel_shader_compile.MaxShaderCompileThreadsTest

XGBE:

1. SFP wont work on V1807 platforms after few hours.
2. Ethernet Link is showing always up on RJ45 ports of Bilby platforms.
   Workaround: Disable the port which is not connected the ethernet cable.
3. Hot plug failures and stability issue with longer duration performance test on Bilby platforms with RG45 ports enabled.
   Workaround: Disable the port which is not connected the ethernet cable.
4. Peer to Peer network is unstable with 1/10G SFP (FC).
5. Can’t concurrently enable SFP+ and RJ45 interfaces.
6. No IEEE 1588 Timestamp support.
7. No receive Split header support.
8. Following features should be functional but have not been fully validated: Priority and VLAN (VLAN Priority Control), RMON Counter, VLAN support and Receive-Side scaling, 2.5G TCP/IP offload (duplex) and 2.5G jumbo frames (duplex).

   Below is the type of SFP/RJ45 modules used in the XGBE validation of this release.

   Type	Model
   1G SFP - RJ45	BEL
   1G SFP - RJ45	Finisar
   10G SFP+ passive direct cable	Finisar
   10G SFP optical	Finisar
   10G SFP optical	Intel
   10G SFP optical	Intel

FreeSync:

1. Only one monitor should be attached to system.
2. The game should be running in fullscreen mode.
3. In case of mGPU, Xorg should be configured for multiscreen mode with only one monitor attached to the GPU where freesync is to be enabled. Please note that window managers should also have good support for multiscreen mode.
4. Supported only on DP.

MultiGPU:

1. Maximum framebuffer / viewport size supported by the GFX engine is 16K. When more than 8 2K monitors are arranged horizontally, we hit this limitation and corruption is observed on a few monitors. To overcome this limitation, the monitors must be re-arranged in a way that 16K limit is not exceeded. Xrandr can be used for this.
2. Beyond 8 monitors, the display doesn’t come up. Xrandr via ssh needs to be used to achieve the goal of not exceeding 16k limit.

Third Party Issues/Limitations:

1. Terminal switching results in hard hang randomly. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
2. Switching to console mode upon hotplug results in soft hang. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
3. Mpv overnight test fails with loopback option.
   Workaround: Use script for continuous playback.
4. Stutter can be observed when stream framerate and monitor refresh rate are different. This is expected phenomenon. Stutter cab be minimized with interpolation option in mpv. But it can introduce corruption and other side effects.

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9360 E9550, E9560 and E9710 series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 18.04.1(64-bit)

Devices Supported:

• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9360 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU

Fixes and Enhancements:

1. MST not working with PCIe daughter card(Passive adapter card) on BE.
2. Bluesh artifacts on Unigine heaven benchmark with Antialiasing on.
3. Hard hang with mpv vaapi-vappi configuration in fullscreen mode on V1000.
4. Display artifacts while doing S3 on dGPU’s.
5. Few resolutions were not get applied on LG 4k monitors.
6. Tearing observed while playing youtube video in chrome.
7. Pink splash screen after rebooting with HDMI(DP-HDMI) cable.
8. Stutter observed with 4k@60 video playback on V1000/R1000.
9. Hard hang observed with MST (Daisy Chain) and S3 on V1000.
10. Incorrect R/W speed is observed in SD card UHSI-SDR104 in UEFI mode on Bilby platforms.
11. Intermediately stuck while doing S3 on MF and PF.
12. S3 Fails on Steppe eagle.
13. S3 Fails on PF.
14. MST not working on BE.(Note: please add amdgpu.dc=1 for BE/SE).
15. Randomly corruption and softhang observed with S3 and MST on MF.
16. Display goes blank after hotplug of third monitor on V1000.
17. Glmark2 overnight hang.
18. Reboot fails on V1000-NPU.
19. Stutter observed for few samples of Furmark benchmark.
20. Display blank out with 4G MMIO in Bios with 4.19 kernel.
21. Sporadically minor stutter observed with 1080p playback using HDMI in multiple playbacks.
22. Corruption and flickering are observed on all monitors when booted with combination of MST Enabled and normal monitors.
23. Stuttering observed with VDPAU playback on H264 60fps streams in Fullscreen mode.
24. One of the monitor going blank after doing multiple S3 with MST Daisy chain on V1000/R1000.
25. I2S Audio one side of headset is not audible while playing i2S audio on V1000/R1000.
26. Remote profiling of Hologram in target - Shader frequency is low while capturing the profile in Host on V1000/R1000.

Known Issues and Limitations

R1000:

1. Soft hang observed on Video Playback and S3 in MST (Daisy Chain).
2. Gst-omx Transcode fails with latest mesa(19.2).
   Workaround: copy AMD_Ubuntu-18.04_Kernel_4.19.8_v2019_30_XXXX/binaries/userspace/libomxil-bellagio_new/libomx_mesa.so to /opt/amdgpu-emb/lib/libomxil-bellagio0/
3. Not showing GPU Load in amdgpu_pm_info sysfs entry on V1000 and R1000.
4. Randomly video playback with S3 fails while doing manually on 4.19 kernel.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

5. User experience is very poor after hotplug on mGPU config with more than 6 monitors.
6. Stuttering is observed with vulkan hologram sample on 4k monitor full screen mode.

V1000:

1. S3 Fails at 25th cycle on Dibbler V1000 due to PSP bug.
2. Failures observed in OpenCL Conformance test case execution.
3. Note: Issue root caused gnome which is third party component.
4. Unigine Heaven-Extreme hang with 4x4k displays.
5. Few HSA conformance samples failed.
6. Few OpenCL with CPP tests failed.
7. On Intel CPU(I54690K) + AMD dGPU(E9260] HIP Sample- module_api results in soft hang/failure.
8. OpenCL-GL sharing samples in AMDAPPSDK fail.

Steppe Eagle:

1. Observed amdgpu load failure with ECC memory.
2. WebGLConformance Tab Crashes while running Webglconformance.
   Workaround: Don’t run all/conformance/textures/misc test cases.

Common Issues:

1. Mouse clicks won’t work with 10 bit feature enablement on default gnome desktop environment.
   Workaround: Use KDE plasma desktop.
   https://gitlab.gnome.org/GNOME/mutter/issues/2
2. HP Z27s monitor resolution change does not take effect sometimes.
   Recommendation: Not to use the monitor since the monitor issues HPD pulse during changing resolution causing to revert to previous/native resolution sometimes.
3. Hotplug root node of DP MST monitors in daisy chain or via Hub fails.
   Workaround: To always connect or disconnect monitors in MST configuration one by one and not at root node level.
4. sporadically soft hang observed while doing "capture profile" in Remote profiling of Hologram (RGP) on V1000/R1000.
5. Display blank out with 4G MMIO in Bios with 4.14 kernel.
6. white screen observed when running phoronix test cases(tropics,santuary).
7. Artifacts observed during video playback with multiple 4K monitors on E9173 dGPU.
8. Display artifacts while doing S3 with max 4k monitors on APU’s.
9. Corruption on all four 4k monitors when resize the Video play back window to full screen and vice versa.
   Workaround: issue root caused to display underflow and GPU usage high indicating usage beyond hardware capability. A workaround is to disable window effects using command "gsettings set org.gnome.desktop.interface enable-animations false"
10. All MST displays goes blank while booting with MST Hub and MST off on the monitors.
11. One of the monitor going blank after doing multiple S3 with MST Hub configuration.
12. Tearing/Stutter observed during 4k@60fps playback on 2x4k monitors.
    Workaround: Use zaphord Head configuration to play 4k@60fps video on multi monitor setup.
13. Hard hang observed for Piglit tests.
    Workaround: Piglit test passed without arb_tessellation_shader-tes-gs-max-output test cases.
14. Base mark Web3.0 failed.
15. Stuttering observed with glmark2 on mGPU config.
    Workaround: Use multi screen configuration to resolve the stutter.
16. [BE]: Observed Issues with HotPlug on Bald Eagle.
17. [BE]: S3 Fails randomly on BaldEagle with IOMMU enabled.
18. Issues with refresh rate change/rotate using xrandr command.
19. Export MESA_GLES_VERSION_OVERRIDE=3.2 to run OGL ES 3.2 CTS.
20. Hot plug results in blank display of one of the monitors when using startx mode.
21. B-frame support is not available in vaapi encode.
22. MF has limitation of displaying 2 – 4K monitors, 3rd 4 K monitor will not get displayed.
23. Following OGL CTS test cases do not work
    1. GL45-CTS.stencil_texturing.functional
    2. GL45-CTS.multi_bind.dispatch_bind_textures
    3. GL45-CTS.multi_bind.dispatch_bind_image_textures
    4. GL45-CTS.arrays_of_arrays_gl.SubroutineFunctionCalls2
    5. GL45-CTS.sparse_buffer_tests.BufferStorageTest
    6. GL45-CTS.shader_atomic_counters.basic-usage-fs
    7. GL45-CTS.shader_atomic_counters.basic-usage-vs
    8. GL45-CTS.shader_atomic_counters.basic-usage-gs
    9. GL45-CTS.shader_atomic_counters.basic-usage-tes
    10. GL45-CTS.shader_atomic_counters.basic-usage-cs
    11. GL45-CTS.parallel_shader_compile.CompilationCompletionNonParallelTest
    12. GL45-CTS.parallel_shader_compile.CompilationCompletionParallelTest
    13. GL45-CTS.enhanced_layouts.ssb_member_offset_and_align
    14. GL45-CTS.enhanced_layouts.vertex_attrib_
    15. GL45-CTS.parallel_shader_compile.MaxShaderCompileThreadsTest

XGBE:

1. SFP wont work on V1807 platforms after few hours.
2. Ethernet Link is showing always up on RJ45 ports of Bilby platforms.
   Workaround: Disable the port which is not connected the ethernet cable.
3. Hot plug failures and stability issue with longer duration performance test on Bilby platforms with RG45 ports enabled.
   Workaround: Disable the port which is not connected the ethernet cable.
4. Peer to Peer network is unstable with 1/10G SFP (FC).
5. Can’t concurrently enable SFP+ and RJ45 interfaces.
6. No IEEE 1588 Timestamp support.
7. No receive Split header support.
8. Following features should be functional but have not been fully validated: Priority and VLAN (VLAN Priority Control), RMON Counter, VLAN support and Receive-Side scaling, 2.5G TCP/IP offload (duplex) and 2.5G jumbo frames (duplex).

   Below is the type of SFP/RJ45 modules used in the XGBE validation of this release.

   Type	Model
   1G SFP - RJ45	BEL
   1G SFP - RJ45	Finisar
   10G SFP+ passive direct cable	Finisar
   10G SFP optical	Finisar
   10G SFP optical	Intel
   10G SFP optical	Intel

FreeSync:

1. Only one monitor should be attached to system.
2. The game should be running in fullscreen mode.
3. In case of mGPU, Xorg should be configured for multiscreen mode with only one monitor attached to the GPU where freesync is to be enabled. Please note that window managers should also have good support for multiscreen mode.
4. Supported only on DP.

MultiGPU:

1. Maximum framebuffer / viewport size supported by the GFX engine is 16K. When more than 8 2K monitors are arranged horizontally, we hit this limitation and corruption is observed on a few monitors. To overcome this limitation, the monitors must be re-arranged in a way that 16K limit is not exceeded. Xrandr can be used for this.
2. Beyond 8 monitors, the display doesn’t come up. Xrandr via ssh needs to be used to achieve the goal of not exceeding 16k limit.

Third Party Issues/Limitations:

1. Terminal switching results in hard hang randomly. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
2. Switching to console mode upon hotplug results in soft hang. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
3. Mpv overnight test fails with loopback option.
   Workaround: Use script for continuous playback.
4. Stutter can be observed when stream framerate and monitor refresh rate are different. This is expected phenomenon. Stutter cab be minimized with interpolation option in mpv. But it can introduce corruption and other side effects.

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9360 E9550, E9560 and E9710 series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 18.04.1(64-bit)

Devices Supported:

• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9360 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU

Fixes and Enhancements:

1. MST not working with PCIe daughter card(Passive adapter card) on BE.
2. Bluesh artifacts on Unigine heaven benchmark with Antialiasing on.
3. Hard hang with mpv vaapi-vappi configuration in fullscreen mode on V1000.
4. Display artifacts while doing S3 on dGPU’s.
5. Few resolutions were not get applied on LG 4k monitors.
6. Tearing observed while playing youtube video in chrome.
7. Pink splash screen after rebooting with HDMI(DP-HDMI) cable.
8. Stutter observed with 4k@60 video playback on V1000/R1000.
9. Hard hang observed with MST (Daisy Chain) and S3 on V1000.
10. Incorrect R/W speed is observed in SD card UHSI-SDR104 in UEFI mode on Bilby platforms.
11. Intermediately stuck while doing S3 on MF and PF.
12. S3 Fails on Steppe eagle.
13. S3 Fails on PF.
14. MST not working on BE.(Note: please add amdgpu.dc=1 for BE/SE).
15. Randomly corruption and softhang observed with S3 and MST on MF.
16. Display goes blank after hotplug of third monitor on V1000.
17. Glmark2 overnight hang.
18. Reboot fails on V1000-NPU.
19. Stutter observed for few samples of Furmark benchmark.
20. Display blank out with 4G MMIO in Bios with 4.19 kernel.
21. Sporadically minor stutter observed with 1080p playback using HDMI in multiple playbacks.
22. Corruption and flickering are observed on all monitors when booted with combination of MST Enabled and normal monitors.
23. Stuttering observed with VDPAU playback on H264 60fps streams in Fullscreen mode.
24. One of the monitor going blank after doing multiple S3 with MST Daisy chain on V1000/R1000.
25. I2S Audio one side of headset is not audible while playing i2S audio on V1000/R1000.
26. Remote profiling of Hologram in target - Shader frequency is low while capturing the profile in Host on V1000/R1000.

Known Issues and Limitations

R1000:

1. Soft hang observed on Video Playback and S3 in MST (Daisy Chain).
2. Gst-omx Transcode fails with latest mesa(19.2).
   Workaround: copy AMD_Ubuntu-18.04_Kernel_4.19.8_v2019_30_XXXX/binaries/userspace/libomxil-bellagio_new/libomx_mesa.so to /opt/amdgpu-emb/lib/libomxil-bellagio0/
3. Not showing GPU Load in amdgpu_pm_info sysfs entry on V1000 and R1000.
4. Randomly video playback with S3 fails while doing manually on 4.19 kernel.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

5. User experience is very poor after hotplug on mGPU config with more than 6 monitors.
6. Stuttering is observed with vulkan hologram sample on 4k monitor full screen mode.

V1000:

1. S3 Fails at 25th cycle on Dibbler V1000 due to PSP bug.
2. Failures observed in OpenCL Conformance test case execution.
3. Note: Issue root caused gnome which is third party component.
4. Unigine Heaven-Extreme hang with 4x4k displays.
5. Few HSA conformance samples failed.
6. Few OpenCL with CPP tests failed.
7. On Intel CPU(I54690K) + AMD dGPU(E9260] HIP Sample- module_api results in soft hang/failure.
8. OpenCL-GL sharing samples in AMDAPPSDK fail.

Steppe Eagle:

1. Observed amdgpu load failure with ECC memory.
2. WebGLConformance Tab Crashes while running Webglconformance.
   Workaround: Don’t run all/conformance/textures/misc test cases.

Common Issues:

1. Mouse clicks won’t work with 10 bit feature enablement on default gnome desktop environment.
   Workaround: Use KDE plasma desktop.
   https://gitlab.gnome.org/GNOME/mutter/issues/2
2. HP Z27s monitor resolution change does not take effect sometimes.
   Recommendation: Not to use the monitor since the monitor issues HPD pulse during changing resolution causing to revert to previous/native resolution sometimes.
3. Hotplug root node of DP MST monitors in daisy chain or via Hub fails.
   Workaround: To always connect or disconnect monitors in MST configuration one by one and not at root node level.
4. sporadically soft hang observed while doing "capture profile" in Remote profiling of Hologram (RGP) on V1000/R1000.
5. Display blank out with 4G MMIO in Bios with 4.14 kernel.
6. white screen observed when running phoronix test cases(tropics,santuary).
7. Artifacts observed during video playback with multiple 4K monitors on E9173 dGPU.
8. Display artifacts while doing S3 with max 4k monitors on APU’s.
9. Corruption on all four 4k monitors when resize the Video play back window to full screen and vice versa.
   Workaround: issue root caused to display underflow and GPU usage high indicating usage beyond hardware capability. A workaround is to disable window effects using command "gsettings set org.gnome.desktop.interface enable-animations false"
10. All MST displays goes blank while booting with MST Hub and MST off on the monitors.
11. One of the monitor going blank after doing multiple S3 with MST Hub configuration.
12. Tearing/Stutter observed during 4k@60fps playback on 2x4k monitors.
    Workaround: Use zaphord Head configuration to play 4k@60fps video on multi monitor setup.
13. Hard hang observed for Piglit tests.
    Workaround: Piglit test passed without arb_tessellation_shader-tes-gs-max-output test cases.
14. Base mark Web3.0 failed.
15. Stuttering observed with glmark2 on mGPU config.
    Workaround: Use multi screen configuration to resolve the stutter.
16. [BE]: Observed Issues with HotPlug on Bald Eagle.
17. [BE]: S3 Fails randomly on BaldEagle with IOMMU enabled.
18. Issues with refresh rate change/rotate using xrandr command.
19. Export MESA_GLES_VERSION_OVERRIDE=3.2 to run OGL ES 3.2 CTS.
20. Hot plug results in blank display of one of the monitors when using startx mode.
21. B-frame support is not available in vaapi encode.
22. MF has limitation of displaying 2 – 4K monitors, 3rd 4 K monitor will not get displayed.
23. Following OGL CTS test cases do not work
    1. GL45-CTS.stencil_texturing.functional
    2. GL45-CTS.multi_bind.dispatch_bind_textures
    3. GL45-CTS.multi_bind.dispatch_bind_image_textures
    4. GL45-CTS.arrays_of_arrays_gl.SubroutineFunctionCalls2
    5. GL45-CTS.sparse_buffer_tests.BufferStorageTest
    6. GL45-CTS.shader_atomic_counters.basic-usage-fs
    7. GL45-CTS.shader_atomic_counters.basic-usage-vs
    8. GL45-CTS.shader_atomic_counters.basic-usage-gs
    9. GL45-CTS.shader_atomic_counters.basic-usage-tes
    10. GL45-CTS.shader_atomic_counters.basic-usage-cs
    11. GL45-CTS.parallel_shader_compile.CompilationCompletionNonParallelTest
    12. GL45-CTS.parallel_shader_compile.CompilationCompletionParallelTest
    13. GL45-CTS.enhanced_layouts.ssb_member_offset_and_align
    14. GL45-CTS.enhanced_layouts.vertex_attrib_
    15. GL45-CTS.parallel_shader_compile.MaxShaderCompileThreadsTest

XGBE:

1. SFP wont work on V1807 platforms after few hours.
2. Ethernet Link is showing always up on RJ45 ports of Bilby platforms.
   Workaround: Disable the port which is not connected the ethernet cable.
3. Hot plug failures and stability issue with longer duration performance test on Bilby platforms with RG45 ports enabled.
   Workaround: Disable the port which is not connected the ethernet cable.
4. Peer to Peer network is unstable with 1/10G SFP (FC).
5. Can’t concurrently enable SFP+ and RJ45 interfaces.
6. No IEEE 1588 Timestamp support.
7. No receive Split header support.
8. Following features should be functional but have not been fully validated: Priority and VLAN (VLAN Priority Control), RMON Counter, VLAN support and Receive-Side scaling, 2.5G TCP/IP offload (duplex) and 2.5G jumbo frames (duplex).

   Below is the type of SFP/RJ45 modules used in the XGBE validation of this release.

   Type	Model
   1G SFP - RJ45	BEL
   1G SFP - RJ45	Finisar
   10G SFP+ passive direct cable	Finisar
   10G SFP optical	Finisar
   10G SFP optical	Intel
   10G SFP optical	Intel

FreeSync:

1. Only one monitor should be attached to system.
2. The game should be running in fullscreen mode.
3. In case of mGPU, Xorg should be configured for multiscreen mode with only one monitor attached to the GPU where freesync is to be enabled. Please note that window managers should also have good support for multiscreen mode.
4. Supported only on DP.

MultiGPU:

1. Maximum framebuffer / viewport size supported by the GFX engine is 16K. When more than 8 2K monitors are arranged horizontally, we hit this limitation and corruption is observed on a few monitors. To overcome this limitation, the monitors must be re-arranged in a way that 16K limit is not exceeded. Xrandr can be used for this.
2. Beyond 8 monitors, the display doesn’t come up. Xrandr via ssh needs to be used to achieve the goal of not exceeding 16k limit.

Third Party Issues/Limitations:

1. Terminal switching results in hard hang randomly. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
2. Switching to console mode upon hotplug results in soft hang. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
3. Mpv overnight test fails with loopback option.
   Workaround: Use script for continuous playback.
4. Stutter can be observed when stream framerate and monitor refresh rate are different. This is expected phenomenon. Stutter cab be minimized with interpolation option in mpv. But it can introduce corruption and other side effects.

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9360 E9550, E9560 and E9710 series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 18.04.1(64-bit)

Devices Supported:

• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9360 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU

Fixes and Enhancements:

1. MST not working with PCIe daughter card(Passive adapter card) on BE.
2. Bluesh artifacts on Unigine heaven benchmark with Antialiasing on.
3. Hard hang with mpv vaapi-vappi configuration in fullscreen mode on V1000.
4. Display artifacts while doing S3 on dGPU’s.
5. Few resolutions were not get applied on LG 4k monitors.
6. Tearing observed while playing youtube video in chrome.
7. Pink splash screen after rebooting with HDMI(DP-HDMI) cable.
8. Stutter observed with 4k@60 video playback on V1000/R1000.
9. Hard hang observed with MST (Daisy Chain) and S3 on V1000.
10. Incorrect R/W speed is observed in SD card UHSI-SDR104 in UEFI mode on Bilby platforms.
11. Intermediately stuck while doing S3 on MF and PF.
12. S3 Fails on Steppe eagle.
13. S3 Fails on PF.
14. MST not working on BE.(Note: please add amdgpu.dc=1 for BE/SE).
15. Randomly corruption and softhang observed with S3 and MST on MF.
16. Display goes blank after hotplug of third monitor on V1000.
17. Glmark2 overnight hang.
18. Reboot fails on V1000-NPU.
19. Stutter observed for few samples of Furmark benchmark.
20. Display blank out with 4G MMIO in Bios with 4.19 kernel.
21. Sporadically minor stutter observed with 1080p playback using HDMI in multiple playbacks.
22. Corruption and flickering are observed on all monitors when booted with combination of MST Enabled and normal monitors.
23. Stuttering observed with VDPAU playback on H264 60fps streams in Fullscreen mode.
24. One of the monitor going blank after doing multiple S3 with MST Daisy chain on V1000/R1000.
25. I2S Audio one side of headset is not audible while playing i2S audio on V1000/R1000.
26. Remote profiling of Hologram in target - Shader frequency is low while capturing the profile in Host on V1000/R1000.

Known Issues and Limitations

R1000:

1. Soft hang observed on Video Playback and S3 in MST (Daisy Chain).
2. Gst-omx Transcode fails with latest mesa(19.2).
   Workaround: copy AMD_Ubuntu-18.04_Kernel_4.19.8_v2019_30_XXXX/binaries/userspace/libomxil-bellagio_new/libomx_mesa.so to /opt/amdgpu-emb/lib/libomxil-bellagio0/
3. Not showing GPU Load in amdgpu_pm_info sysfs entry on V1000 and R1000.
4. Randomly video playback with S3 fails while doing manually on 4.19 kernel.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

5. User experience is very poor after hotplug on mGPU config with more than 6 monitors.
6. Stuttering is observed with vulkan hologram sample on 4k monitor full screen mode.

V1000:

1. S3 Fails at 25th cycle on Dibbler V1000 due to PSP bug.
2. Failures observed in OpenCL Conformance test case execution.
3. Note: Issue root caused gnome which is third party component.
4. Unigine Heaven-Extreme hang with 4x4k displays.
5. Few HSA conformance samples failed.
6. Few OpenCL with CPP tests failed.
7. On Intel CPU(I54690K) + AMD dGPU(E9260] HIP Sample- module_api results in soft hang/failure.
8. OpenCL-GL sharing samples in AMDAPPSDK fail.

Steppe Eagle:

1. Observed amdgpu load failure with ECC memory.
2. WebGLConformance Tab Crashes while running Webglconformance.
   Workaround: Don’t run all/conformance/textures/misc test cases.

Common Issues:

1. Mouse clicks won’t work with 10 bit feature enablement on default gnome desktop environment.
   Workaround: Use KDE plasma desktop.
   https://gitlab.gnome.org/GNOME/mutter/issues/2
2. HP Z27s monitor resolution change does not take effect sometimes.
   Recommendation: Not to use the monitor since the monitor issues HPD pulse during changing resolution causing to revert to previous/native resolution sometimes.
3. Hotplug root node of DP MST monitors in daisy chain or via Hub fails.
   Workaround: To always connect or disconnect monitors in MST configuration one by one and not at root node level.
4. sporadically soft hang observed while doing "capture profile" in Remote profiling of Hologram (RGP) on V1000/R1000.
5. Display blank out with 4G MMIO in Bios with 4.14 kernel.
6. white screen observed when running phoronix test cases(tropics,santuary).
7. Artifacts observed during video playback with multiple 4K monitors on E9173 dGPU.
8. Display artifacts while doing S3 with max 4k monitors on APU’s.
9. Corruption on all four 4k monitors when resize the Video play back window to full screen and vice versa.
   Workaround: issue root caused to display underflow and GPU usage high indicating usage beyond hardware capability. A workaround is to disable window effects using command "gsettings set org.gnome.desktop.interface enable-animations false"
10. All MST displays goes blank while booting with MST Hub and MST off on the monitors.
11. One of the monitor going blank after doing multiple S3 with MST Hub configuration.
12. Tearing/Stutter observed during 4k@60fps playback on 2x4k monitors.
    Workaround: Use zaphord Head configuration to play 4k@60fps video on multi monitor setup.
13. Hard hang observed for Piglit tests.
    Workaround: Piglit test passed without arb_tessellation_shader-tes-gs-max-output test cases.
14. Base mark Web3.0 failed.
15. Stuttering observed with glmark2 on mGPU config.
    Workaround: Use multi screen configuration to resolve the stutter.
16. [BE]: Observed Issues with HotPlug on Bald Eagle.
17. [BE]: S3 Fails randomly on BaldEagle with IOMMU enabled.
18. Issues with refresh rate change/rotate using xrandr command.
19. Export MESA_GLES_VERSION_OVERRIDE=3.2 to run OGL ES 3.2 CTS.
20. Hot plug results in blank display of one of the monitors when using startx mode.
21. B-frame support is not available in vaapi encode.
22. MF has limitation of displaying 2 – 4K monitors, 3rd 4 K monitor will not get displayed.
23. Following OGL CTS test cases do not work
    1. GL45-CTS.stencil_texturing.functional
    2. GL45-CTS.multi_bind.dispatch_bind_textures
    3. GL45-CTS.multi_bind.dispatch_bind_image_textures
    4. GL45-CTS.arrays_of_arrays_gl.SubroutineFunctionCalls2
    5. GL45-CTS.sparse_buffer_tests.BufferStorageTest
    6. GL45-CTS.shader_atomic_counters.basic-usage-fs
    7. GL45-CTS.shader_atomic_counters.basic-usage-vs
    8. GL45-CTS.shader_atomic_counters.basic-usage-gs
    9. GL45-CTS.shader_atomic_counters.basic-usage-tes
    10. GL45-CTS.shader_atomic_counters.basic-usage-cs
    11. GL45-CTS.parallel_shader_compile.CompilationCompletionNonParallelTest
    12. GL45-CTS.parallel_shader_compile.CompilationCompletionParallelTest
    13. GL45-CTS.enhanced_layouts.ssb_member_offset_and_align
    14. GL45-CTS.enhanced_layouts.vertex_attrib_
    15. GL45-CTS.parallel_shader_compile.MaxShaderCompileThreadsTest

XGBE:

1. SFP wont work on V1807 platforms after few hours.
2. Ethernet Link is showing always up on RJ45 ports of Bilby platforms.
   Workaround: Disable the port which is not connected the ethernet cable.
3. Hot plug failures and stability issue with longer duration performance test on Bilby platforms with RG45 ports enabled.
   Workaround: Disable the port which is not connected the ethernet cable.
4. Peer to Peer network is unstable with 1/10G SFP (FC).
5. Can’t concurrently enable SFP+ and RJ45 interfaces.
6. No IEEE 1588 Timestamp support.
7. No receive Split header support.
8. Following features should be functional but have not been fully validated: Priority and VLAN (VLAN Priority Control), RMON Counter, VLAN support and Receive-Side scaling, 2.5G TCP/IP offload (duplex) and 2.5G jumbo frames (duplex).

   Below is the type of SFP/RJ45 modules used in the XGBE validation of this release.

   Type	Model
   1G SFP - RJ45	BEL
   1G SFP - RJ45	Finisar
   10G SFP+ passive direct cable	Finisar
   10G SFP optical	Finisar
   10G SFP optical	Intel
   10G SFP optical	Intel

FreeSync:

1. Only one monitor should be attached to system.
2. The game should be running in fullscreen mode.
3. In case of mGPU, Xorg should be configured for multiscreen mode with only one monitor attached to the GPU where freesync is to be enabled. Please note that window managers should also have good support for multiscreen mode.
4. Supported only on DP.

MultiGPU:

1. Maximum framebuffer / viewport size supported by the GFX engine is 16K. When more than 8 2K monitors are arranged horizontally, we hit this limitation and corruption is observed on a few monitors. To overcome this limitation, the monitors must be re-arranged in a way that 16K limit is not exceeded. Xrandr can be used for this.
2. Beyond 8 monitors, the display doesn’t come up. Xrandr via ssh needs to be used to achieve the goal of not exceeding 16k limit.

Third Party Issues/Limitations:

1. Terminal switching results in hard hang randomly. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
2. Switching to console mode upon hotplug results in soft hang. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
3. Mpv overnight test fails with loopback option.
   Workaround: Use script for continuous playback.
4. Stutter can be observed when stream framerate and monitor refresh rate are different. This is expected phenomenon. Stutter cab be minimized with interpolation option in mpv. But it can introduce corruption and other side effects.

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9360 E9550, E9560 and E9710 series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 18.04.1(64-bit)

Devices Supported:

• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9360 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU

Fixes and Enhancements:

1. MST not working with PCIe daughter card(Passive adapter card) on BE.
2. Bluesh artifacts on Unigine heaven benchmark with Antialiasing on.
3. Hard hang with mpv vaapi-vappi configuration in fullscreen mode on V1000.
4. Display artifacts while doing S3 on dGPU’s.
5. Few resolutions were not get applied on LG 4k monitors.
6. Tearing observed while playing youtube video in chrome.
7. Pink splash screen after rebooting with HDMI(DP-HDMI) cable.
8. Stutter observed with 4k@60 video playback on V1000/R1000.
9. Hard hang observed with MST (Daisy Chain) and S3 on V1000.
10. Incorrect R/W speed is observed in SD card UHSI-SDR104 in UEFI mode on Bilby platforms.
11. Intermediately stuck while doing S3 on MF and PF.
12. S3 Fails on Steppe eagle.
13. S3 Fails on PF.
14. MST not working on BE.(Note: please add amdgpu.dc=1 for BE/SE).
15. Randomly corruption and softhang observed with S3 and MST on MF.
16. Display goes blank after hotplug of third monitor on V1000.
17. Glmark2 overnight hang.
18. Reboot fails on V1000-NPU.
19. Stutter observed for few samples of Furmark benchmark.
20. Display blank out with 4G MMIO in Bios with 4.19 kernel.
21. Sporadically minor stutter observed with 1080p playback using HDMI in multiple playbacks.
22. Corruption and flickering are observed on all monitors when booted with combination of MST Enabled and normal monitors.
23. Stuttering observed with VDPAU playback on H264 60fps streams in Fullscreen mode.
24. One of the monitor going blank after doing multiple S3 with MST Daisy chain on V1000/R1000.
25. I2S Audio one side of headset is not audible while playing i2S audio on V1000/R1000.
26. Remote profiling of Hologram in target - Shader frequency is low while capturing the profile in Host on V1000/R1000.

Known Issues and Limitations

R1000:

1. Soft hang observed on Video Playback and S3 in MST (Daisy Chain).
2. Gst-omx Transcode fails with latest mesa(19.2).
   Workaround: copy AMD_Ubuntu-18.04_Kernel_4.19.8_v2019_30_XXXX/binaries/userspace/libomxil-bellagio_new/libomx_mesa.so to /opt/amdgpu-emb/lib/libomxil-bellagio0/
3. Not showing GPU Load in amdgpu_pm_info sysfs entry on V1000 and R1000.
4. Randomly video playback with S3 fails while doing manually on 4.19 kernel.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

5. User experience is very poor after hotplug on mGPU config with more than 6 monitors.
6. Stuttering is observed with vulkan hologram sample on 4k monitor full screen mode.

V1000:

1. S3 Fails at 25th cycle on Dibbler V1000 due to PSP bug.
2. Failures observed in OpenCL Conformance test case execution.
3. Note: Issue root caused gnome which is third party component.
4. Unigine Heaven-Extreme hang with 4x4k displays.
5. Few HSA conformance samples failed.
6. Few OpenCL with CPP tests failed.
7. On Intel CPU(I54690K) + AMD dGPU(E9260] HIP Sample- module_api results in soft hang/failure.
8. OpenCL-GL sharing samples in AMDAPPSDK fail.

Steppe Eagle:

1. Observed amdgpu load failure with ECC memory.
2. WebGLConformance Tab Crashes while running Webglconformance.
   Workaround: Don’t run all/conformance/textures/misc test cases.

Common Issues:

1. Mouse clicks won’t work with 10 bit feature enablement on default gnome desktop environment.
   Workaround: Use KDE plasma desktop.
   https://gitlab.gnome.org/GNOME/mutter/issues/2
2. HP Z27s monitor resolution change does not take effect sometimes.
   Recommendation: Not to use the monitor since the monitor issues HPD pulse during changing resolution causing to revert to previous/native resolution sometimes.
3. Hotplug root node of DP MST monitors in daisy chain or via Hub fails.
   Workaround: To always connect or disconnect monitors in MST configuration one by one and not at root node level.
4. sporadically soft hang observed while doing "capture profile" in Remote profiling of Hologram (RGP) on V1000/R1000.
5. Display blank out with 4G MMIO in Bios with 4.14 kernel.
6. white screen observed when running phoronix test cases(tropics,santuary).
7. Artifacts observed during video playback with multiple 4K monitors on E9173 dGPU.
8. Display artifacts while doing S3 with max 4k monitors on APU’s.
9. Corruption on all four 4k monitors when resize the Video play back window to full screen and vice versa.
   Workaround: issue root caused to display underflow and GPU usage high indicating usage beyond hardware capability. A workaround is to disable window effects using command "gsettings set org.gnome.desktop.interface enable-animations false"
10. All MST displays goes blank while booting with MST Hub and MST off on the monitors.
11. One of the monitor going blank after doing multiple S3 with MST Hub configuration.
12. Tearing/Stutter observed during 4k@60fps playback on 2x4k monitors.
    Workaround: Use zaphord Head configuration to play 4k@60fps video on multi monitor setup.
13. Hard hang observed for Piglit tests.
    Workaround: Piglit test passed without arb_tessellation_shader-tes-gs-max-output test cases.
14. Base mark Web3.0 failed.
15. Stuttering observed with glmark2 on mGPU config.
    Workaround: Use multi screen configuration to resolve the stutter.
16. [BE]: Observed Issues with HotPlug on Bald Eagle.
17. [BE]: S3 Fails randomly on BaldEagle with IOMMU enabled.
18. Issues with refresh rate change/rotate using xrandr command.
19. Export MESA_GLES_VERSION_OVERRIDE=3.2 to run OGL ES 3.2 CTS.
20. Hot plug results in blank display of one of the monitors when using startx mode.
21. B-frame support is not available in vaapi encode.
22. MF has limitation of displaying 2 – 4K monitors, 3rd 4 K monitor will not get displayed.
23. Following OGL CTS test cases do not work
    1. GL45-CTS.stencil_texturing.functional
    2. GL45-CTS.multi_bind.dispatch_bind_textures
    3. GL45-CTS.multi_bind.dispatch_bind_image_textures
    4. GL45-CTS.arrays_of_arrays_gl.SubroutineFunctionCalls2
    5. GL45-CTS.sparse_buffer_tests.BufferStorageTest
    6. GL45-CTS.shader_atomic_counters.basic-usage-fs
    7. GL45-CTS.shader_atomic_counters.basic-usage-vs
    8. GL45-CTS.shader_atomic_counters.basic-usage-gs
    9. GL45-CTS.shader_atomic_counters.basic-usage-tes
    10. GL45-CTS.shader_atomic_counters.basic-usage-cs
    11. GL45-CTS.parallel_shader_compile.CompilationCompletionNonParallelTest
    12. GL45-CTS.parallel_shader_compile.CompilationCompletionParallelTest
    13. GL45-CTS.enhanced_layouts.ssb_member_offset_and_align
    14. GL45-CTS.enhanced_layouts.vertex_attrib_
    15. GL45-CTS.parallel_shader_compile.MaxShaderCompileThreadsTest

XGBE:

1. SFP wont work on V1807 platforms after few hours.
2. Ethernet Link is showing always up on RJ45 ports of Bilby platforms.
   Workaround: Disable the port which is not connected the ethernet cable.
3. Hot plug failures and stability issue with longer duration performance test on Bilby platforms with RG45 ports enabled.
   Workaround: Disable the port which is not connected the ethernet cable.
4. Peer to Peer network is unstable with 1/10G SFP (FC).
5. Can’t concurrently enable SFP+ and RJ45 interfaces.
6. No IEEE 1588 Timestamp support.
7. No receive Split header support.
8. Following features should be functional but have not been fully validated: Priority and VLAN (VLAN Priority Control), RMON Counter, VLAN support and Receive-Side scaling, 2.5G TCP/IP offload (duplex) and 2.5G jumbo frames (duplex).

   Below is the type of SFP/RJ45 modules used in the XGBE validation of this release.

   Type	Model
   1G SFP - RJ45	BEL
   1G SFP - RJ45	Finisar
   10G SFP+ passive direct cable	Finisar
   10G SFP optical	Finisar
   10G SFP optical	Intel
   10G SFP optical	Intel

FreeSync:

1. Only one monitor should be attached to system.
2. The game should be running in fullscreen mode.
3. In case of mGPU, Xorg should be configured for multiscreen mode with only one monitor attached to the GPU where freesync is to be enabled. Please note that window managers should also have good support for multiscreen mode.
4. Supported only on DP.

MultiGPU:

1. Maximum framebuffer / viewport size supported by the GFX engine is 16K. When more than 8 2K monitors are arranged horizontally, we hit this limitation and corruption is observed on a few monitors. To overcome this limitation, the monitors must be re-arranged in a way that 16K limit is not exceeded. Xrandr can be used for this.
2. Beyond 8 monitors, the display doesn’t come up. Xrandr via ssh needs to be used to achieve the goal of not exceeding 16k limit.

Third Party Issues/Limitations:

1. Terminal switching results in hard hang randomly. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
2. Switching to console mode upon hotplug results in soft hang. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
3. Mpv overnight test fails with loopback option.
   Workaround: Use script for continuous playback.
4. Stutter can be observed when stream framerate and monitor refresh rate are different. This is expected phenomenon. Stutter cab be minimized with interpolation option in mpv. But it can introduce corruption and other side effects.

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9360 E9550, E9560 and E9710 series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

Supported OS:​

• Ubuntu 18.04.1(64-bit)

Devices Supported:

• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9360 dGPU
• E9560 dGPU
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU

Fixes and Enhancements:

1. MST not working with PCIe daughter card(Passive adapter card) on BE.
2. Bluesh artifacts on Unigine heaven benchmark with Antialiasing on.
3. Hard hang with mpv vaapi-vappi configuration in fullscreen mode on V1000.
4. Display artifacts while doing S3 on dGPU’s.
5. Few resolutions were not get applied on LG 4k monitors.
6. Tearing observed while playing youtube video in chrome.
7. Pink splash screen after rebooting with HDMI(DP-HDMI) cable.
8. Stutter observed with 4k@60 video playback on V1000/R1000.
9. Hard hang observed with MST (Daisy Chain) and S3 on V1000.
10. Incorrect R/W speed is observed in SD card UHSI-SDR104 in UEFI mode on Bilby platforms.
11. Intermediately stuck while doing S3 on MF and PF.
12. S3 Fails on Steppe eagle.
13. S3 Fails on PF.
14. MST not working on BE.(Note: please add amdgpu.dc=1 for BE/SE).
15. Randomly corruption and softhang observed with S3 and MST on MF.
16. Display goes blank after hotplug of third monitor on V1000.
17. Glmark2 overnight hang.
18. Reboot fails on V1000-NPU.
19. Stutter observed for few samples of Furmark benchmark.
20. Display blank out with 4G MMIO in Bios with 4.19 kernel.
21. Sporadically minor stutter observed with 1080p playback using HDMI in multiple playbacks.
22. Corruption and flickering are observed on all monitors when booted with combination of MST Enabled and normal monitors.
23. Stuttering observed with VDPAU playback on H264 60fps streams in Fullscreen mode.
24. One of the monitor going blank after doing multiple S3 with MST Daisy chain on V1000/R1000.
25. I2S Audio one side of headset is not audible while playing i2S audio on V1000/R1000.
26. Remote profiling of Hologram in target - Shader frequency is low while capturing the profile in Host on V1000/R1000.

Known Issues and Limitations

R1000:

1. Soft hang observed on Video Playback and S3 in MST (Daisy Chain).
2. Gst-omx Transcode fails with latest mesa(19.2).
   Workaround: copy AMD_Ubuntu-18.04_Kernel_4.19.8_v2019_30_XXXX/binaries/userspace/libomxil-bellagio_new/libomx_mesa.so to /opt/amdgpu-emb/lib/libomxil-bellagio0/
3. Not showing GPU Load in amdgpu_pm_info sysfs entry on V1000 and R1000.
4. Randomly video playback with S3 fails while doing manually on 4.19 kernel.
   Workaround: Unload and load the USB module while doing S3. Copy the below script to /lib/system/system-sleep/

   #!/bin/sh
   case $1/$2 in
     pre/*)
       echo "removing module xhci-pci "
       rmmod xhci-pci   
       ;;
       post/*)
       echo "Waking up from $2..."
       modprobe xhci-pci
       ;;
   esac

5. User experience is very poor after hotplug on mGPU config with more than 6 monitors.
6. Stuttering is observed with vulkan hologram sample on 4k monitor full screen mode.

V1000:

1. S3 Fails at 25th cycle on Dibbler V1000 due to PSP bug.
2. Failures observed in OpenCL Conformance test case execution.
3. Note: Issue root caused gnome which is third party component.
4. Unigine Heaven-Extreme hang with 4x4k displays.
5. Few HSA conformance samples failed.
6. Few OpenCL with CPP tests failed.
7. On Intel CPU(I54690K) + AMD dGPU(E9260] HIP Sample- module_api results in soft hang/failure.
8. OpenCL-GL sharing samples in AMDAPPSDK fail.

Steppe Eagle:

1. Observed amdgpu load failure with ECC memory.
2. WebGLConformance Tab Crashes while running Webglconformance.
   Workaround: Don’t run all/conformance/textures/misc test cases.

Common Issues:

1. Mouse clicks won’t work with 10 bit feature enablement on default gnome desktop environment.
   Workaround: Use KDE plasma desktop.
   https://gitlab.gnome.org/GNOME/mutter/issues/2
2. HP Z27s monitor resolution change does not take effect sometimes.
   Recommendation: Not to use the monitor since the monitor issues HPD pulse during changing resolution causing to revert to previous/native resolution sometimes.
3. Hotplug root node of DP MST monitors in daisy chain or via Hub fails.
   Workaround: To always connect or disconnect monitors in MST configuration one by one and not at root node level.
4. sporadically soft hang observed while doing "capture profile" in Remote profiling of Hologram (RGP) on V1000/R1000.
5. Display blank out with 4G MMIO in Bios with 4.14 kernel.
6. white screen observed when running phoronix test cases(tropics,santuary).
7. Artifacts observed during video playback with multiple 4K monitors on E9173 dGPU.
8. Display artifacts while doing S3 with max 4k monitors on APU’s.
9. Corruption on all four 4k monitors when resize the Video play back window to full screen and vice versa.
   Workaround: issue root caused to display underflow and GPU usage high indicating usage beyond hardware capability. A workaround is to disable window effects using command "gsettings set org.gnome.desktop.interface enable-animations false"
10. All MST displays goes blank while booting with MST Hub and MST off on the monitors.
11. One of the monitor going blank after doing multiple S3 with MST Hub configuration.
12. Tearing/Stutter observed during 4k@60fps playback on 2x4k monitors.
    Workaround: Use zaphord Head configuration to play 4k@60fps video on multi monitor setup.
13. Hard hang observed for Piglit tests.
    Workaround: Piglit test passed without arb_tessellation_shader-tes-gs-max-output test cases.
14. Base mark Web3.0 failed.
15. Stuttering observed with glmark2 on mGPU config.
    Workaround: Use multi screen configuration to resolve the stutter.
16. [BE]: Observed Issues with HotPlug on Bald Eagle.
17. [BE]: S3 Fails randomly on BaldEagle with IOMMU enabled.
18. Issues with refresh rate change/rotate using xrandr command.
19. Export MESA_GLES_VERSION_OVERRIDE=3.2 to run OGL ES 3.2 CTS.
20. Hot plug results in blank display of one of the monitors when using startx mode.
21. B-frame support is not available in vaapi encode.
22. MF has limitation of displaying 2 – 4K monitors, 3rd 4 K monitor will not get displayed.
23. Following OGL CTS test cases do not work
    1. GL45-CTS.stencil_texturing.functional
    2. GL45-CTS.multi_bind.dispatch_bind_textures
    3. GL45-CTS.multi_bind.dispatch_bind_image_textures
    4. GL45-CTS.arrays_of_arrays_gl.SubroutineFunctionCalls2
    5. GL45-CTS.sparse_buffer_tests.BufferStorageTest
    6. GL45-CTS.shader_atomic_counters.basic-usage-fs
    7. GL45-CTS.shader_atomic_counters.basic-usage-vs
    8. GL45-CTS.shader_atomic_counters.basic-usage-gs
    9. GL45-CTS.shader_atomic_counters.basic-usage-tes
    10. GL45-CTS.shader_atomic_counters.basic-usage-cs
    11. GL45-CTS.parallel_shader_compile.CompilationCompletionNonParallelTest
    12. GL45-CTS.parallel_shader_compile.CompilationCompletionParallelTest
    13. GL45-CTS.enhanced_layouts.ssb_member_offset_and_align
    14. GL45-CTS.enhanced_layouts.vertex_attrib_
    15. GL45-CTS.parallel_shader_compile.MaxShaderCompileThreadsTest

XGBE:

1. SFP wont work on V1807 platforms after few hours.
2. Ethernet Link is showing always up on RJ45 ports of Bilby platforms.
   Workaround: Disable the port which is not connected the ethernet cable.
3. Hot plug failures and stability issue with longer duration performance test on Bilby platforms with RG45 ports enabled.
   Workaround: Disable the port which is not connected the ethernet cable.
4. Peer to Peer network is unstable with 1/10G SFP (FC).
5. Can’t concurrently enable SFP+ and RJ45 interfaces.
6. No IEEE 1588 Timestamp support.
7. No receive Split header support.
8. Following features should be functional but have not been fully validated: Priority and VLAN (VLAN Priority Control), RMON Counter, VLAN support and Receive-Side scaling, 2.5G TCP/IP offload (duplex) and 2.5G jumbo frames (duplex).

   Below is the type of SFP/RJ45 modules used in the XGBE validation of this release.

   Type	Model
   1G SFP - RJ45	BEL
   1G SFP - RJ45	Finisar
   10G SFP+ passive direct cable	Finisar
   10G SFP optical	Finisar
   10G SFP optical	Intel
   10G SFP optical	Intel

FreeSync:

1. Only one monitor should be attached to system.
2. The game should be running in fullscreen mode.
3. In case of mGPU, Xorg should be configured for multiscreen mode with only one monitor attached to the GPU where freesync is to be enabled. Please note that window managers should also have good support for multiscreen mode.
4. Supported only on DP.

MultiGPU:

1. Maximum framebuffer / viewport size supported by the GFX engine is 16K. When more than 8 2K monitors are arranged horizontally, we hit this limitation and corruption is observed on a few monitors. To overcome this limitation, the monitors must be re-arranged in a way that 16K limit is not exceeded. Xrandr can be used for this.
2. Beyond 8 monitors, the display doesn’t come up. Xrandr via ssh needs to be used to achieve the goal of not exceeding 16k limit.

Third Party Issues/Limitations:

1. Terminal switching results in hard hang randomly. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
2. Switching to console mode upon hotplug results in soft hang. Issue root caused gnome which is third party component.
   https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1758512
3. Mpv overnight test fails with loopback option.
   Workaround: Use script for continuous playback.
4. Stutter can be observed when stream framerate and monitor refresh rate are different. This is expected phenomenon. Stutter cab be minimized with interpolation option in mpv. But it can introduce corruption and other side effects.

Linux "amdgpu" open source driver consists of the following kernel and user space components that support R1000, V1000, Brown Falcon SOC, Merlin Falcon SOC, Steppe Eagle, Bald Eagle and Prairie Falcon SOC along with E9260, E9550 and E9710 series dGPUs. The components can be directly downloaded from below links:

​

Note: Open source development is an ongoing process and code gets updated in a continual manner.

New in this release:

• R1000 GA.
• V1000 NPU + dGPU.

Supported OS:​

• Ubuntu 18.04.1(64-bit)

Devices Supported:

• R1000
• V1000
• V1000 NPU
• Steppe Eagle
• Bald Eagle
• Merlin Falcon
• Brown Falcon
• Prairie Falcon
• E9260 dGPU
• E9550 dGPU
• E9171 dGPU
• E9172 dGPU
• E9173 dGPU
• E9174 dGPU
• E9175 dGPU